100% Original Factory Zinc Cut Wire 0.3mm - Brown Fused Alumina – TAA
100% Original Factory Zinc Cut Wire 0.3mm - Brown Fused Alumina – TAA Detail:
Features
Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation.
Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free.
Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine.
Technical specification
| Type | Item | Appearance | ||||
| Al2O3 | Fe2O3 | SiO2 | CaO | TiO2 | ||
| A | ≥95% | ≤0.3% | ≤1.5% | ≤0.45% | 1.5-3.8% | Brown particle |
| B | ≥90% | ≤0.3% | ≤1.5% | ≤0.45% | Black particle,grey powder | |
| C | ≥85% | ≤0.3% | ≤1.5% | ≤0.45% | ||
| D | ≥80% | ≤0.3% | ≤1.5% | ≤0.45% | ||
| E | ≥70% | ≤0.3% | ≤1.5% | ≤0.45% | ||
| Gravity | 4.6gr/cc | |||||
| Hardness | 9.0mohs | |||||
| Fusing Point | 2250℃ | |||||
| Density | 3.85g/cm3 | |||||
Applications
* Ship Repair and Building—Stainless steel sand blasting, outfifi eld sandblasting
* Marine Engineering—Stainless steel sand blasting, outfifi eld sandblasting
* Aerospace
* Non-ferrous Metal Casting and Forging
* Mold Making
Aluminum oxide is widely used in surface treatment before coating, descaling and deburring for aluminum alloy, stainless steel and other non-ferrous metal parts,mold cleaning, flatting and surface coarsening before metal spray painting for its high purity and high efficiency.
Product detail pictures:
Related Product Guide:
We have been ready to share our knowledge of internet marketing worldwide and recommend you suitable merchandise at most aggressive rates. So Profi Tools present you very best price of money and we are ready to develop alongside one another with 100% Original Factory Zinc Cut Wire 0.3mm - Brown Fused Alumina – TAA , The product will supply to all over the world, such as: azerbaijan, Peru, Boston, We insist on "Quality First, Reputation First and Customer First". We are committed to providing high-quality products and good after-sales services. Up to now, our products have been exported to more than 60 countries and areas around the world, such as America, Australia and Europe. We enjoy a high reputation at home and abroad. Always persisting in the principle of "Credit, Customer and Quality", we expect cooperation with people in all walks of life for mutual benefits.
By Maud from Albania - 2017.09.29 11:19
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Agustin from Hongkong - 2018.09.21 11:01
Related products
-
Renewable Design for Sponge Media Abrasives G12...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
Good User Reputation for Silver 220 Sponge Medi...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...
-
100% Original Factory Diamond Cutting Disc 115m...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Wholesale Price China Bearing Steel Grit Gh50 -...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
factory low price Steel Grit G16 - Glass beads...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specification Chemica...
-
Factory wholesale Small Shot Blasting Machine -...
Steel mill tumble belt shot blast machines are used for deburring,descaling, sand removal and derusting mass parts. They are operated either as a stand-alone solution or as part of a line. In addition to the standard program, delivers this machine in several sizes and designs. The machines are equipped with the tried and tested high-performance turbines and the maintenance-friendly cartridge filter systems. Decisive Advantages of Steel mill tumble belt shot blast machines: AGTOS Blasting tech...
