• product-bg
  • product-bg

2018 High quality Gl40 Bearing Steel Grit - Low Carbon Steel Shot – TAA

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our pursuit and company intention is usually to "Always fulfill our purchaser requirements". We go on to acquire and layout excellent high quality products for both our previous and new consumers and realize a win-win prospect for our customers too as us for 2.5mm Aluminum Cut Wire, Steel Grit G50, Gp40 Steel Grit, We sincerely welcome you come to visit us. Hope we have good cooperation in the future.
2018 High quality Gl40 Bearing Steel Grit - Low Carbon Steel Shot – TAA Detail:

Low Carbon Steel Shot1

Product feature

High strengthen, high tenacity, long service life.
Low breakage, low dust, low pollution.
Low wear of the equipments, long life of accessory.
Reduce dedusting system load, lengthen usage time of dedusting equipments.

Technical specification

Chemical Composition%

C

0.10-0.20%

Si

0.10-0.35%

Mn

0.35-1.50%

S

≤0.05%

P

≤0.05%

Other alloy elements

Adding Cr Mo Ni B Al Cu etc.

Hardness

HRC42-48/48-54

Microstructure

Duplex structure combined Martensite and Bainite

Density

≥ 7.2g/cm3

External form

Spherical

Size distribution

Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930
6 0.132 3.35 All pass
7 0.111 2.80 All pass
8 0.0937 2.36 All pass ≥90%
10 0.0787 2.00 All pass All pass ≥85% ≥97%
12 0.0661 1.70 All pass ≤5% ≥85% ≥97%
14 0.0555 1.40 All pass ≤5% ≥85% ≥97%
16 0.0469 1.18 All pass ≤5% ≥85% ≥97%
18 0.0394 1.00 All pass ≤5% ≥85% ≥96%
20 0.0331 0.850 All pass ≤10% ≥85% ≥96%
25 0.0280 0.710 ≤10% ≥85% ≥96%
30 0.0232 0.600 All pass ≥85% ≥96%
35 0.0197 0.500 ≤10% ≥97%
40 0.0165 0.425 All Pass ≥85%
45 0.0138 0.355 ≤10% ≥97%
50 0.0117 0.300 ≥80%
80 0.007 0.180 ≥80% ≥90%
120 0.0049 0.125 ≥90%
200 0.0029 0.075

Fatigue Life Test

Consumption Contrast Figure of TAA LCB steel shot, low-carbon steel shot and high-carbon steel shot.(fatigue life test of normal grades at an impacting speed ratio of 60.96m/s)

Consumption contrast-Normal grade

Low Carbon Steel Shot2
Low Carbon Steel Shot3

Through the fatigue life test we can see that: the service life of TAA LCB Steel Shot is 1.5 times longer than common low carbon steel shot, 2 times longer than high carbon steel shot.

Application

Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Shot peening: Shot peening of gear, heat treated parts.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.


Product detail pictures:

2018 High quality Gl40 Bearing Steel Grit - Low Carbon Steel Shot – TAA detail pictures


Related Product Guide:

All we do is usually connected with our tenet " Customer to start with, Rely on initial, devoting on the food packaging and environmental protection for 2018 High quality Gl40 Bearing Steel Grit - Low Carbon Steel Shot – TAA , The product will supply to all over the world, such as: Nigeria, Tajikistan, America, we are now looking forward to even greater cooperation with overseas customers based on mutual benefits. We will work wholeheartedly to improve our products and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.
  • It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
    5 Stars By Teresa from India - 2017.03.07 13:42
    The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
    5 Stars By Sabina from Angola - 2017.11.20 15:58
    Write your message here and send it to us

    Related products

    • 2018 Latest Design Low Carbon Steel Shot S110 - Aluminum cut wire – TAA

      2018 Latest Design Low Carbon Steel Shot S110 -...

      Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Microhar...

    • Factory Promotional Zinc Cut Wire 0.5mm - Copper cut wire – TAA

      Factory Promotional Zinc Cut Wire 0.5mm - Copp...

      Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...

    • OEM/ODM Factory Sponge Media Abrasive - Glass beads – TAA

      OEM/ODM Factory Sponge Media Abrasive - Glass ...

      Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specificatio...

    • China Gold Supplier for Sponge Jet Media Blasting - Low Carbon Steel Shot – TAA

      China Gold Supplier for Sponge Jet Media Blasti...

      Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...

    • Factory making G16 Steel Grit - Steel Grit – TAA

      Factory making G16 Steel Grit - Steel Grit ...

      Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.  GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelti...

    • High Quality Stainless Steel Polishing Shot - Carbon steel cut wire shot – TAA

      High Quality Stainless Steel Polishing Shot - ...

      We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life.  Item Technical index Chemi...