• product-bg
  • product-bg

2018 High quality Zinc Shot Blasting - Low Carbon Steel Shot – TAA

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

"Quality to start with, Honesty as base, Sincere company and mutual profit" is our idea, as a way to build constantly and pursue the excellence for Stainless Steel Grit Sizes, Stainless Steel Cw, 430 0.5mm Stainless Steel Cut Wire Shot, We look forward to supplying you with our products in the near future, and you will find our quotation is very reasonable and the quality of our products is very excellent!
2018 High quality Zinc Shot Blasting - Low Carbon Steel Shot – TAA Detail:

Low Carbon Steel Shot1

Product feature

High strengthen, high tenacity, long service life.
Low breakage, low dust, low pollution.
Low wear of the equipments, long life of accessory.
Reduce dedusting system load, lengthen usage time of dedusting equipments.

Technical specification

Chemical Composition%

C

0.10-0.20%

Si

0.10-0.35%

Mn

0.35-1.50%

S

≤0.05%

P

≤0.05%

Other alloy elements

Adding Cr Mo Ni B Al Cu etc.

Hardness

HRC42-48/48-54

Microstructure

Duplex structure combined Martensite and Bainite

Density

≥ 7.2g/cm3

External form

Spherical

Size distribution

Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930
6 0.132 3.35 All pass
7 0.111 2.80 All pass
8 0.0937 2.36 All pass ≥90%
10 0.0787 2.00 All pass All pass ≥85% ≥97%
12 0.0661 1.70 All pass ≤5% ≥85% ≥97%
14 0.0555 1.40 All pass ≤5% ≥85% ≥97%
16 0.0469 1.18 All pass ≤5% ≥85% ≥97%
18 0.0394 1.00 All pass ≤5% ≥85% ≥96%
20 0.0331 0.850 All pass ≤10% ≥85% ≥96%
25 0.0280 0.710 ≤10% ≥85% ≥96%
30 0.0232 0.600 All pass ≥85% ≥96%
35 0.0197 0.500 ≤10% ≥97%
40 0.0165 0.425 All Pass ≥85%
45 0.0138 0.355 ≤10% ≥97%
50 0.0117 0.300 ≥80%
80 0.007 0.180 ≥80% ≥90%
120 0.0049 0.125 ≥90%
200 0.0029 0.075

Fatigue Life Test

Consumption Contrast Figure of TAA LCB steel shot, low-carbon steel shot and high-carbon steel shot.(fatigue life test of normal grades at an impacting speed ratio of 60.96m/s)

Consumption contrast-Normal grade

Low Carbon Steel Shot2
Low Carbon Steel Shot3

Through the fatigue life test we can see that: the service life of TAA LCB Steel Shot is 1.5 times longer than common low carbon steel shot, 2 times longer than high carbon steel shot.

Application

Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Shot peening: Shot peening of gear, heat treated parts.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.


Product detail pictures:

2018 High quality Zinc Shot Blasting - Low Carbon Steel Shot – TAA detail pictures


Related Product Guide:

The key to our success is "Good Product Excellent, Reasonable Rate and Efficient Service" for 2018 High quality Zinc Shot Blasting - Low Carbon Steel Shot – TAA , The product will supply to all over the world, such as: Jordan, Turkmenistan, Finland, Now, we professionally supplies customers with our main products And our business is not only the "buy" and "sell", but also focus on more. We target to be your loyal supplier and long-term cooperator in China. Now, We hope to be the friends with you.
  • The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
    5 Stars By Mario from Mauritania - 2017.09.26 12:12
    We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
    5 Stars By Johnny from Roman - 2018.12.11 14:13
    Write your message here and send it to us

    Related products

    • Reasonable price Diamond Wet Wheel Tile Cutter - Cutting disc FS-03 series – TAA

      Reasonable price Diamond Wet Wheel Tile Cutter ...

      Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...

    • OEM Supply 0.6mm Stainless Steel Cut Wire Shot - Steel Shot – TAA

      OEM Supply 0.6mm Stainless Steel Cut Wire Shot ...

      Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50  Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35                       All pass 7 0.111 2.80                     All pass   8 0.0937 2.36                   All...

    • Good Quality Stainless Steel Shot Peening - Garnet – TAA

      Good Quality Stainless Steel Shot Peening - Ga...

      Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...

    • Original Factory Protective Liner - Belt tumble shot blast machine – TAA

      Original Factory Protective Liner - Belt tumbl...

      Advantages of TAA rubber belt tumble blast machines Reliable blasting technology Innovative filter technology Many different variants Automation through harmonisation with in-house transport system. TAA high-performance turbines: Our turbines are solid, well-constructed pieces of machinery. Due to a smaller number of wear parts and high abrasive throughput, they operate extremely economically. Many different variants: Because of the many different variants, it is possible to build the...

    • Well-designed Low Carbon Steel Shot S550 - Low Carbon Steel Shot – TAA

      Well-designed Low Carbon Steel Shot S550 - Low...

      Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duple...

    • Cheapest Factory Diamond Cut Grinding Wheel - Cutting disc FS-05 series – TAA

      Cheapest Factory Diamond Cut Grinding Wheel - ...

      Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...