• product-bg
  • product-bg

8 Year Exporter Carbon Steel Cut Wire 0.5mm - Sponge media abrasives – TAA

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With our loaded encounter and considerate services, we have now been recognized as a trustworthy supplier for lots of worldwide consumers for Gh50 Steel Grit, 410 Stainless Steel Cut Wire Shot 1.2mm, Steel Shot Beads, "Quality first, Price lowest, Service best" is the spirit of our company. We sincerely welcome you to visit our company and negotiate mutual business!
8 Year Exporter Carbon Steel Cut Wire 0.5mm - Sponge media abrasives – TAA Detail:

Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting.

The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit.

Type Profiles Abrasive Media Agent Application
TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings.
TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron.
TAA-S#30 ±50 micron Aluminum Oxide#80 Effective for one or two laryers coatings and profile to50 micron.
TAA-S#30 ±25 micron Aluminum Oxide#120 Effective on light and moderate rust, producing 25 micron profile.
TAA-S#30 <25 micron Aluminum Oxide#220 For light coatings removal or to leave minor surface profiling.
TAA-G-40 +100 micron Steel Grit G40 Removal the toughest coating. For surface preparation on deteriorated surfaces and for removing elastomeric or other extremely thich coatings.

Features

1.  Sponge media abrasives manufactured with polyurethane sponge is low breakage and longer lasting and could well suppress dust pollution which normally resulted from the abrasives breakage.
2.  The sponge material absorbs the surface contaminants (mill scale, grease, etc) and thus improves the cleanness of the subject surface.
3.  Worker safety is enhanced and risks such as eye and industrial injury is reduced due to low rebound of the porous sponge.
4.  Less quality defects and low reworking
5.  High quality surface treatment of sensitive and defined area
6.  Coating lasting longer, reducing maintaining cost.
7.  Recycling
8.  Its sand blasting equipment is small in size and portable and suitable for surface cleaning of narrow area and special part.
9. This environment friendly, safe and high efficient new abrasive brings about clean, quite and visible work sites.

Operating principle

Sponge media abrasives0101

1. Dual-component sponge media abrasive are propoed to the surface using an air-doven system
2. Blasting of sponge media abrasive
* Absorb collision energy, flattened and suppress the release of loosened surface contaminants
* Expose the abrasive, remove surface contanη inants
3. When leaving the surface, the Sponge media abrasives expands back to normal size creating a vacuum which absorbs most of the dusts and contaminants

Applications

Widely used in Marine, Offshore Engineering, Military, Petrochemical Project, Aerospace & Aviation, Nuclear Power, Historic Restoration, Wall Cleaning, Building Maintenance etc.


Product detail pictures:

8 Year Exporter Carbon Steel Cut Wire 0.5mm - Sponge media abrasives – TAA detail pictures

8 Year Exporter Carbon Steel Cut Wire 0.5mm - Sponge media abrasives – TAA detail pictures


Related Product Guide:

We've our have sales staff, style and design staff, technical crew, QC team and package workforce. We've strict excellent control procedures for each system. Also, all of our workers are experienced in printing field for 8 Year Exporter Carbon Steel Cut Wire 0.5mm - Sponge media abrasives – TAA , The product will supply to all over the world, such as: US, Somalia, Albania, Based on our automatic production line, steady material purchase channel and quick subcontract systems have been built in mainland China to meet customer's wider and higher requirement in recent years. We have been looking forward to cooperating with more clients worldwide for common development and mutual benefit!Your trust and approval are the best reward for our efforts. Keeping honest, innovative and efficient, we sincerely expect that we can be business partners to create our brilliant future!
  • High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
    5 Stars By Letitia from Algeria - 2018.05.15 10:52
    In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
    5 Stars By Janice from Kenya - 2018.11.04 10:32
    Write your message here and send it to us

    Related products

    • Special Price for 60# Brown Fused Alumina - Brown Fused Alumina – TAA

      Special Price for 60# Brown Fused Alumina - Br...

      Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...

    • Wholesale Copper Cut Wire Shot 2.5mm - Stainless steel cut wire shot – TAA

      Wholesale Copper Cut Wire Shot 2.5mm - Stainle...

      Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...

    • High reputation Gp120 Steel Grit - Steel Shot – TAA

      High reputation Gp120 Steel Grit - Steel Shot ...

      Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All pass ≥90% 10 0.0787 2.00 All pa...

    • China wholesale Unitized Grinding Wheel - Cutting disc FS-05 series – TAA

      China wholesale Unitized Grinding Wheel - Cutt...

      Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...

    • Renewable Design for Glass Bead Blasting For Sale - Stainless steel grit – TAA

      Renewable Design for Glass Bead Blasting For Sa...

      Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...

    • Online Exporter Types Of Cutting Disc - Grinding wheels FW-09 series – TAA

      Online Exporter Types Of Cutting Disc - Grindi...

      Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...