8 Year Exporter G14 Sponge Media Abrasives - Low Carbon Steel Shot – TAA
8 Year Exporter G14 Sponge Media Abrasives - Low Carbon Steel Shot – TAA Detail:
Product feature
High strengthen, high tenacity, long service life.
Low breakage, low dust, low pollution.
Low wear of the equipments, long life of accessory.
Reduce dedusting system load, lengthen usage time of dedusting equipments.
Technical specification
Chemical Composition% |
C |
0.10-0.20% |
Si |
0.10-0.35% |
|
Mn |
0.35-1.50% |
|
S |
≤0.05% |
|
P |
≤0.05% |
|
Other alloy elements |
Adding Cr Mo Ni B Al Cu etc. |
|
Hardness |
HRC42-48/48-54 |
|
Microstructure |
Duplex structure combined Martensite and Bainite |
|
Density |
≥ 7.2g/cm3 |
|
External form |
Spherical |
Size distribution
Screen No. | Inch | Screen size | S70 | S110 | S170 | S230 | S280 | S330 | S390 | S460 | S550 | S660 | S780 | S930 |
6 | 0.132 | 3.35 | All pass | |||||||||||
7 | 0.111 | 2.80 | All pass | |||||||||||
8 | 0.0937 | 2.36 | All pass | ≥90% | ||||||||||
10 | 0.0787 | 2.00 | All pass | All pass | ≥85% | ≥97% | ||||||||
12 | 0.0661 | 1.70 | All pass | ≤5% | ≥85% | ≥97% | ||||||||
14 | 0.0555 | 1.40 | All pass | ≤5% | ≥85% | ≥97% | ||||||||
16 | 0.0469 | 1.18 | All pass | ≤5% | ≥85% | ≥97% | ||||||||
18 | 0.0394 | 1.00 | All pass | ≤5% | ≥85% | ≥96% | ||||||||
20 | 0.0331 | 0.850 | All pass | ≤10% | ≥85% | ≥96% | ||||||||
25 | 0.0280 | 0.710 | ≤10% | ≥85% | ≥96% | |||||||||
30 | 0.0232 | 0.600 | All pass | ≥85% | ≥96% | |||||||||
35 | 0.0197 | 0.500 | ≤10% | ≥97% | ||||||||||
40 | 0.0165 | 0.425 | All Pass | ≥85% | ||||||||||
45 | 0.0138 | 0.355 | ≤10% | ≥97% | ||||||||||
50 | 0.0117 | 0.300 | ≥80% | |||||||||||
80 | 0.007 | 0.180 | ≥80% | ≥90% | ||||||||||
120 | 0.0049 | 0.125 | ≥90% | |||||||||||
200 | 0.0029 | 0.075 |
Fatigue Life Test
Consumption Contrast Figure of TAA LCB steel shot, low-carbon steel shot and high-carbon steel shot.(fatigue life test of normal grades at an impacting speed ratio of 60.96m/s)
Consumption contrast-Normal grade
Through the fatigue life test we can see that: the service life of TAA LCB Steel Shot is 1.5 times longer than common low carbon steel shot, 2 times longer than high carbon steel shot.
Application
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Shot peening: Shot peening of gear, heat treated parts.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.
Product detail pictures:
Related Product Guide:
We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for 8 Year Exporter G14 Sponge Media Abrasives - Low Carbon Steel Shot – TAA , The product will supply to all over the world, such as: Cannes, Turkey, Rio de Janeiro, Strict quality control is executed in each link of the whole production process.We sincerely hope to establish the friendly and mutual-beneficial cooperation with you. Based on high quality products and perfect pre-sales /after-sales service is our idea, some clients had cooperated with us for more than 5 years.
By Donna from New Zealand - 2018.09.16 11:31
This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
By Adam from Paris - 2017.03.07 13:42