Aluminum cut wire
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It's mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine.
Tech Data
|
Products |
Aluminium Cut Wire Shot |
|
Chemical Composition |
Al≥99% |
|
Microhardness |
45~50HV |
|
Tensile Intensity |
80~240Mpa |
|
Durability |
6500 Times |
|
Microstructure |
Deformed α |
|
Density |
2.7g/cm3 |
|
Bulk Density |
1.5g/cm3 |
|
Appearance |
cylindrical |
Available sizes: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm
Advantages
■ Most economical and lowest consumption
■ Consumption 3-4 times less compare to cast shot
■ No dust formation
■ Faster cleaning
■ Environmental friendly
■ Uniform hardness
■ Stabilized grain size
■ Increased fatigue life of blasted part
Appearance: As-cut(cylindrical)
Application
Surface cleaning and rust removing for cast iron, cast steel, steel plates and steel pipes, metal die casting; precision casting; hardware machinery manufacturing; auto instrumentation, derusting, intensifying, smoothing and so on. Especially used in shot blasting machine and peening machine.
Application
Surface cleaning and rust removing for cast iron, cast steel, steel plates and steel pipes, especially used in shot blasting machine and peening machine.
Related products
-
Steel Shot
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 ...
-
Stainless steel cut wire shot
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt finishing surface treatment effect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good ...
-
Zinc cut wire
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. ...
-
Low Carbon Steel Shot
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ...
-
Carbon steel cut wire shot
We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blastin...
-
Copper cut wire
Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific g...
