• product-bg
  • product-bg

Bearing Steel Grit G18

To create much more benefit for consumers is our company philosophy; customer growing is our working chase for Bearing Steel Grit G18, Stainless Steel Grit Sizes, Stainless Steel Shot Hs Code, Gl40 Steel Grit, We welcome new and previous clients from all walks of lifetime to get in touch with us for future small business interactions and mutual success! Persisting in "High quality, Prompt Delivery, Aggressive Price", now we have established long-term cooperation with consumers from equally overseas and domestically and get new and old clients' large comments for Bearing Steel Grit G18, We put the product quality and customer's benefits to the first place. Our experienced salesmen supply prompt and efficient service. Quality control group make sure the best quality. We believe quality comes from detail. If you have demand, let us work together to get success.


  • New Fashion Design for Glass Bead 80 Grit Abrasive Media - Low Carbon Steel Shot – TAA

    New Fashion Design for Glass Bead 80 Grit Abrasive Media - Low Carbon Steel Shot – TAA

    Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
  • Manufacturer for Steel Shot Media - Stainless steel cut wire shot – TAA

    Manufacturer for Steel Shot Media - Stainless steel cut wire shot – TAA

    Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
  • Reasonable price Copper Cut Wire Blast Media - Sponge media abrasives – TAA

    Reasonable price Copper Cut Wire Blast Media - Sponge media abrasives – TAA

    Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
  • China Gold Supplier for Sponge Jet Media Blasting - Low Carbon Steel Shot – TAA

    China Gold Supplier for Sponge Jet Media Blasting - Low Carbon Steel Shot – TAA

    Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
  • China New Product Bearing Alloy Steel Grit - Bearing steel grit – TAA

    China New Product Bearing Alloy Steel Grit - Bearing steel grit – TAA

    Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
  • 2018 New Style Low Carbon Steel Shot S460 - Copper cut wire – TAA

    2018 New Style Low Carbon Steel Shot S460 - Copper cut wire – TAA

    Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass b...
  • Free sample for Casting Steel Shot S390 For Sandblasting - Zinc cut wire – TAA

    Free sample for Casting Steel Shot S390 For Sandblasting - Zinc cut wire – TAA

    Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and ...
  • High Quality for High Pure Copper Shot - Stainless steel cut wire shot – TAA

    High Quality for High Pure Copper Shot - Stainless steel cut wire shot – TAA

    Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
  • Lowest Price for 304 0.6mm Stainless Steel Cut Wire Shot - Copper cut wire – TAA

    Lowest Price for 304 0.6mm Stainless Steel Cut Wire Shot - Copper cut wire – TAA

    Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass b...
  • Excellent quality Copper Shot Blasting - Bearing steel grit – TAA

    Excellent quality Copper Shot Blasting - Bearing steel grit – TAA

    Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...
  • Wholesale Price Stainless Steel Grit Blast Media - Bearing steel grit – TAA

    Wholesale Price Stainless Steel Grit Blast Media - Bearing steel grit – TAA

    Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...
  • OEM China 0.6mm Carbon Steel Cut Wire - Steel Shot – TAA

    OEM China 0.6mm Carbon Steel Cut Wire - Steel Shot – TAA

    Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50  Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35                       All pass 7 0.111 2.80                     All pass   8 0.0937 2.36                   All...