• product-bg
  • product-bg

Bearing Steel Grit Gl80

By using a full scientific excellent administration method, great quality and fantastic religion, we get good reputation and occupied this discipline for Bearing Steel Grit Gl80, Peening Shot, Low Carbon Steel Shot S780, 1.2mm Stainless Steel Cut Wire Shot, "Quality", "honesty" and "service" is our principle. Our loyalty and commitments remain respectfully at your support. Call Us Today For even further info, get hold of us now. We not only will try our greatest to offer you excellent services to just about every client, but also are ready to receive any suggestion offered by our buyers for Bearing Steel Grit Gl80, We have a good reputation for stable quality products, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with car manufacturers, auto part buyers and the majority of colleagues both at home and abroad. We expect sincere cooperation and common development!


  • Bearing steel grit

    Bearing steel grit

    Bearing Steel Grit is made by crushing forged bearing steel. It is initially developed and used for the stone sawing industry and now also well accepted for the blasting process due to its high performance.

  • Good Wholesale Vendors Carbon Steel Cut Wire 1.0mm - Brown Fused Alumina – TAA

    Good Wholesale Vendors Carbon Steel Cut Wire 1.0mm - Brown Fused Alumina – TAA

    Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type It...
  • PriceList for S110 Steel Shot - Copper cut wire – TAA

    PriceList for S110 Steel Shot - Copper cut wire – TAA

    Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass b...
  • Good Quality Bearing Steel Grit Gl120 - Copper cut wire – TAA

    Good Quality Bearing Steel Grit Gl120 - Copper cut wire – TAA

    Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass b...
  • Good Quality Stainless Steel Shot Peening - Steel Grit – TAA

    Good Quality Stainless Steel Shot Peening - Steel Grit – TAA

    Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.  GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelti...
  • Manufacturer for Gl120 Bearing Steel Grit - Copper cut wire – TAA

    Manufacturer for Gl120 Bearing Steel Grit - Copper cut wire – TAA

    Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass b...
  • China OEM Brown Fused Alumina China - Garnet – TAA

    China OEM Brown Fused Alumina China - Garnet – TAA

    Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not a...
  • High reputation 30/60# Garnet - Glass beads – TAA

    High reputation 30/60# Garnet - Glass beads – TAA

    Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specificatio...
  • High Quality for S230 Steel Shot - Garnet – TAA

    High Quality for S230 Steel Shot - Garnet – TAA

    Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not a...
  • Best Price on 304 0.8mm Stainless Steel Cut Wire Shot - Steel Grit – TAA

    Best Price on 304 0.8mm Stainless Steel Cut Wire Shot - Steel Grit – TAA

    Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.  GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelti...
  • Rapid Delivery for Brown Fused Alumina Hs Code - Copper cut wire – TAA

    Rapid Delivery for Brown Fused Alumina Hs Code - Copper cut wire – TAA

    Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...
  • Well-designed Glass Bead Media Blasting Abrasive - Steel Shot – TAA

    Well-designed Glass Bead Media Blasting Abrasive - Steel Shot – TAA

    Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50  Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35                       All pass 7 0.111 2.80                     All pass   8 0.0937 2.36                   All...