• product-bg
  • product-bg

Bottom price Sand Blasting Copper Cut Wire Shot - Low Carbon Steel Shot – TAA

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

The organization keeps on the procedure concept "scientific management, high quality and efficiency primacy, purchaser supreme for 410 0.3mm Stainless Steel Cut Wire Shot, G40 Steel Grit, 410 Stainless Steel Cut Wire Shot 0.4mm, Make sure you come to feel absolutely cost-free to speak to us for organization. nd we think we're going to share the ideal trading practical experience with all our retailers.
Bottom price Sand Blasting Copper Cut Wire Shot - Low Carbon Steel Shot – TAA Detail:

Low Carbon Steel Shot1

Product feature

High strengthen, high tenacity, long service life.
Low breakage, low dust, low pollution.
Low wear of the equipments, long life of accessory.
Reduce dedusting system load, lengthen usage time of dedusting equipments.

Technical specification

Chemical Composition%

C

0.10-0.20%

Si

0.10-0.35%

Mn

0.35-1.50%

S

≤0.05%

P

≤0.05%

Other alloy elements

Adding Cr Mo Ni B Al Cu etc.

Hardness

HRC42-48/48-54

Microstructure

Duplex structure combined Martensite and Bainite

Density

≥ 7.2g/cm3

External form

Spherical

Size distribution

Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930
6 0.132 3.35                       All pass
7 0.111 2.80                     All pass  
8 0.0937 2.36                   All pass   ≥90%
10 0.0787 2.00               All pass All pass   ≥85% ≥97%
12 0.0661 1.70             All pass ≤5%   ≥85% ≥97%  
14 0.0555 1.40           All pass ≤5%   ≥85% ≥97%    
16 0.0469 1.18         All pass ≤5%   ≥85% ≥97%      
18 0.0394 1.00       All pass ≤5%   ≥85% ≥96%        
20 0.0331 0.850     All pass ≤10%   ≥85% ≥96%          
25 0.0280 0.710     ≤10%   ≥85% ≥96%            
30 0.0232 0.600   All pass   ≥85% ≥96%              
35 0.0197 0.500   ≤10%   ≥97%                
40 0.0165 0.425 All Pass   ≥85%                  
45 0.0138 0.355 ≤10%   ≥97%                  
50 0.0117 0.300   ≥80%                    
80 0.007 0.180 ≥80% ≥90%                    
120 0.0049 0.125 ≥90%                      
200 0.0029 0.075                        

Fatigue Life Test

Consumption Contrast Figure of TAA LCB steel shot, low-carbon steel shot and high-carbon steel shot.(fatigue life test of normal grades at an impacting speed ratio of 60.96m/s)

Consumption contrast-Normal grade

Low Carbon Steel Shot2
Low Carbon Steel Shot3

Through the fatigue life test we can see that: the service life of TAA LCB Steel Shot is 1.5 times longer than common low carbon steel shot, 2 times longer than high carbon steel shot.

Application

Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Shot peening: Shot peening of gear, heat treated parts.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.


Product detail pictures:

Bottom price Sand Blasting Copper Cut Wire Shot - Low Carbon Steel Shot – TAA detail pictures


Related Product Guide:

Our crew through skilled training. Skilled skilled knowledge, strong sense of company, to meet the company wants of customers for Bottom price Sand Blasting Copper Cut Wire Shot - Low Carbon Steel Shot – TAA , The product will supply to all over the world, such as: Lisbon, New Zealand, Japan, As the world economic integration bringing challenges and opportunities to the xxx industry, our company , by carrying on our teamwork, quality first, innovation and mutual benefit, are confident enough to provide our clients sincerely with qualified products, competitive price and great service, and to build a brighter future under the spirit of higher, faster, stronger with our friends together by carrying on our discipline.
  • This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
    5 Stars By Eleanore from Denver - 2017.09.28 18:29
    The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
    5 Stars By John biddlestone from Korea - 2018.05.22 12:13
    Write your message here and send it to us

    Related products

    • High definition Steel Shot S170 - Steel Grit – TAA

      High definition Steel Shot S170 - Steel Grit &...

      Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...

    • Wholesale Discount Cutting Grinding Wheel - Cutting disc FS-03 series – TAA

      Wholesale Discount Cutting Grinding Wheel - Cu...

      Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...

    • OEM Manufacturer Diamond Saw Blade For Grinding - Grinding wheels FW-09 series – TAA

      OEM Manufacturer Diamond Saw Blade For Grinding...

      Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...

    • Original Factory Grinding Wheel Cost - Cutting disc FS-03 series – TAA

      Original Factory Grinding Wheel Cost - Cutting...

      Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...

    • 100% Original Factory Zinc Cut Wire 0.3mm - Steel Grit – TAA

      100% Original Factory Zinc Cut Wire 0.3mm - St...

      Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...

    • PriceList for Garnet Sand Media - Glass beads – TAA

      PriceList for Garnet Sand Media - Glass beads ...

      Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specification Chemica...