• product-bg
  • product-bg

Carbon steel cut wire shot

Short Description:

We provide steel cut wire from new steel wire and old tire wire both.
Application features
Maintaining higher fatigue life under high strength, lower the consumption costs.
Good grain roundness, uniform size, no broken during using, higher shot peening quality.
Most cost-effective when used for shot peening of medchnical parts with hardness range of HRC40-50.


Product Detail

Product Tags

Carbon steel cut wire shot

We made great improvement in material and the techniques on the basis of the traditional production process.
Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable.
Improving the wiredrawing craft which make the internal organization more dense.
Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life.

 Item

Technical index

Chemical Composition%

C

0.45-0.85%

Si

0.15-0.55%

Mn

0.30-1.30%

S

≤0.05%

P

≤0.04%

Alloy elements

appropriate amount

Hardness

HRC38-50/50-55/55-60/58-63/60-65

Microstructure

Deformation pearlite

Density

≥ 7.6g/cm3

Unit weight

4.4kg/L

Main sizes we can supply: 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 1.0mm.

Application

Carbon steel cut wire shot01

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Zinc cut wire

      Zinc cut wire

      Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. ...

    • Glass beads

      Glass beads

      Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the met...

    • Aluminum cut wire

      Aluminum cut wire

      Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It's mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Alum...

    • Bearing steel grit

      Bearing steel grit

      Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has ...

    • Copper cut wire

      Copper cut wire

      Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific g...

    • Steel Grit

      Steel Grit

      Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.  GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipm...