• product-bg
  • product-bg

China OEM Cutting Disc - Grinding wheels FW-07 series – TAA

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With our leading technology as well as our spirit of innovation,mutual cooperation, benefits and development, we will build a prosperous future together with your esteemed company for 304 Stainless Steel Cut Wire Shot 1.0mm, Ss Shot, Bearing Steel Grit Gl25, Let's cooperate hand in hand to jointly make a beautiful future. We sincerely welcome you to visit our company or contact us for cooperation!
China OEM Cutting Disc - Grinding wheels FW-07 series – TAA Detail:

Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diamond tools

Advantages

Safty and environment friendly
Fast cutting and grinding, no break off, no pollution
· High efficiency

Number

Picture

Specification

Safety Rotary Speed(r/min)

Application

Performance comparisons

FW100-07

Grinding wheels0101

100×2.5×16

12000

Flat grinding and deburring of iron casting(ductile cast iron, Gray Cast iron)

1. Grinding iron casting surface, TAA is over 70 times than resin disk, efficiency increased by 100%
2. Grinding steel structure weld area, TAA is 40 times than resin disk, efficiency increased by 100%.
3. Grinding fiber glass, TAA is 40 times than resin disk, efficiency increased by 100%.
4. Grinding marble and ceramic, TAA is 3 times than sintered cutter disk , efficiency increas

FW125-07

125×2.5×22.23

10000

FW150-07

150×3.0×22.23

9500

FW180-07

180×3.0×22.23

8500

FW100-09

Grinding wheels0102

100×2.5×16

12000

Large aread grinding of iron casting (ductile cast iron, Gray Cast iron)

FW125-09

125×2.5×22.23

10000

FW150-09

150×3.0×22.23

9500

FW180-09

180×3.0×22.23

8500

Improving  efficiency of 30%-50% than traditional cutting disk
·Long service life
Using brazing technology,diamond on the surface not falling down

TAA diamond Grinding wheel

TAA diamond Grinding wheel
TAA diamond Grinding wheel1
TAA diamond Grinding wheel2


Product detail pictures:

China OEM Cutting Disc - Grinding wheels FW-07 series – TAA detail pictures

China OEM Cutting Disc - Grinding wheels FW-07 series – TAA detail pictures

China OEM Cutting Disc - Grinding wheels FW-07 series – TAA detail pictures


Related Product Guide:

Innovation, quality and reliability are the core values of our company. These principles today more than ever form the basis of our success as an internationally active mid-size company for China OEM Cutting Disc - Grinding wheels FW-07 series – TAA , The product will supply to all over the world, such as: Korea, Uzbekistan, San Diego, Our products are widely recognized and trusted by users and can meet continuously changing of economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
  • Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
    5 Stars By Sally from Poland - 2017.09.26 12:12
    As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
    5 Stars By Clementine from Milan - 2018.11.04 10:32
    Write your message here and send it to us

    Related products

    • Wholesale Price Stainless Steel Grit Blast Media - Stainless steel grit – TAA

      Wholesale Price Stainless Steel Grit Blast Medi...

      Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...

    • OEM China Brown Fused Alumina For Aluminum - Zinc cut wire – TAA

      OEM China Brown Fused Alumina For Aluminum - Z...

      Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...

    • Chinese Professional Bearing Steel Grit Gh18 - Sponge media abrasives – TAA

      Chinese Professional Bearing Steel Grit Gh18 -...

      Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...

    • Competitive Price for Silver 120 Sponge Media - Low Carbon Steel Shot – TAA

      Competitive Price for Silver 120 Sponge Media -...

      Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...

    • Factory wholesale G50 Stainless Steel Grit - Garnet – TAA

      Factory wholesale G50 Stainless Steel Grit - G...

      Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...

    • OEM/ODM Factory 350mm Cutting Disc - Grinding wheels FW-07 series – TAA

      OEM/ODM Factory 350mm Cutting Disc - Grinding ...

      Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...