Copper cut wire
Tech Data
|
Product Description |
Copper Cut Wire Shot |
|
Chemical Composition |
Cu: 58-99%, the rest is Zn |
|
Microhardness |
110~300HV |
|
Tensile Intensity |
200~500Mpa |
|
Durability |
5000 Times |
|
Microstructure |
Deformed αorα+β |
|
Density |
8.9 g/cm3 |
|
Bulk Density |
5.1 g/cm3 |
Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc.
Advantage
1. Long life time
2. Less Dust
3. Specific gravity higher than other blasting beads
4. Lower hardness than steel shot &glass beads
5. Shape: Cylindrical/rounded
Application
1. for new and old steel outdoor surface cleaning, descaling, strengthen.
2. as a wear-resistant flooring aggregate, hard floor tiles can be made for the square, garages and other non-slip floor.
3. for counterweight sand, such as cement plants.
4. through after fine processing, suitable for all kinds of denim spray and spray more sophisticated use.
5. the abrasive material (sand, hard abrasive paper, sandpaper, emery cloth).
It is widely used in surface treatment such as descaling, burr removing, elimination of surface defects, internal stress relief, etching, matte, leveling, strengthening and rust prevention before applying in the metal die castings, precision castings, hardware & tools, machinery manufacturing, auto parts, instruments & meters, pumps and valves industries.
Related products
-
Sponge media abrasives
Sponge media abrasive is a cluster of abrasive media with urethane sponge as adhesive, which combines the containment capability of urethane sponge with the cleaning and cutting power of traditional blasting media. It flattens out during impact, exposing the abrasives to the surface with certain and profile created. When leaving the surface, the sponge expands back to regular size creating a vacuum which absorbs most of the contaminants, and therefore improves the sa...
-
Brown Fused Alumina
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. ...
-
Carbon steel cut wire shot
We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blastin...
-
Garnet
Features ■ Low Dust---The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality---It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blastin...
-
Steel Grit
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipm...
-
Steel Shot
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 ...
