• product-bg
  • product-bg

Factory Cheap Hot Gl18 Steel Grit - Garnet – TAA

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Adhering into the principle of "quality, provider, performance and growth", we now have gained trusts and praises from domestic and intercontinental consumer for Alloy Steel Grit, Steel Grit Gl25, G40 Bearing Steel Grit, We promise to try our greatest to deliver you with high quality and economical products and services.
Factory Cheap Hot Gl18 Steel Grit - Garnet – TAA Detail:

Features

■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area.
■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not adversely dimples and pits, easy access to 50-70 microns surface roughness.
■ Recyclable—Its excellent tenacity and lower brittleness can lower damage rates and higher productivity. Depending on the specific application, it can be reused up to 3 times.
■ Lower Production Costs—The paint’s adhesion and corrosion resistance depends on the cleanliness and surface roughness of base material. Using garnet abrasive can greatly saving the amount of paint by completely eliminate adverse spur and pits.
■ Improve Health and Safety—It’s non-toxic characteristics can greatly reducing silicosis, leaching of metals or radioactive contamination risks.

Technical specification

Item

Content

Physical Properties

Chemical compositions %

SiO2

34-40%

Mohs Hardness

Mohs 7.5-8.0

Fe2O3+FeO

25-31%

Specific Gravity

3.7-4.2g/cm3

Al2O3

15-21%

Bulk Density

1.8-1.9g/cm3

MgO

5-6%

Chloride Content

10-15ppm(25ppm max)

CaO

5-10%

Color

Red/Pink/brown

MnO

0-1.0%

Acid Solubility

<1%

TiO2

0.25%

Grain Shape

Sub Angular

Commonly used sizes
20/40mesh, 30/60mesh, 80mesh, 70/100mesh etc.

Applications

Blasting abrasives: Derusting of steel structure, hull, bridges
Water jet cutting: Cutting metal, stone, glass
Grinding media: Grinding marble, optical lens, glass, leather and other materials
Filter medium of chemical, petroleum, pharmacy, water treatment
Coated abrasives of grinding wheel, emery cloth, sandpaper
Wear-resistant material: Used in highway pavement, airport runway, prevent slippery, wear-resisting rubber paint


Product detail pictures:

Factory Cheap Hot Gl18 Steel Grit - Garnet – TAA detail pictures

Factory Cheap Hot Gl18 Steel Grit - Garnet – TAA detail pictures


Related Product Guide:

With advanced technologies and facilities, strict high-quality handle, reasonable rate, superior services and close co-operation with prospects, we are devoted to furnishing the best price for our customers for Factory Cheap Hot Gl18 Steel Grit - Garnet – TAA , The product will supply to all over the world, such as: Juventus, Iceland, kazakhstan, Our technical expertise, customer-friendly service, and specialized merchandise make us/company name the first choice of customers and vendors. We've been looking for your inquiry. Let's set up the cooperation right now!
  • Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.
    5 Stars By John biddlestone from Oman - 2017.07.07 13:00
    It can be said that this is a best producer we encountered in China in this industry, we feel lucky to work with so excellent manufacturer.
    5 Stars By Mamie from Ireland - 2017.04.08 14:55
    Write your message here and send it to us

    Related products

    • Factory Supply Copper Cut Wire Shot - Steel Grit – TAA

      Factory Supply Copper Cut Wire Shot - Steel Gr...

      Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...

    • Factory wholesale S330 Steel Shot - Copper cut wire – TAA

      Factory wholesale S330 Steel Shot - Copper cut...

      Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...

    • Professional Design Brown Fused Alumina 36# - Sponge media abrasives – TAA

      Professional Design Brown Fused Alumina 36# - ...

      Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...

    • PriceList for Steel Shot S550 - Garnet – TAA

      PriceList for Steel Shot S550 - Garnet –...

      Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not a...

    • OEM Manufacturer Wheel Blasting Abrasive - Bearing steel grit – TAA

      OEM Manufacturer Wheel Blasting Abrasive - Bea...

      Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...

    • Cheap price Copper Blasting Grit - Sponge media abrasives – TAA

      Cheap price Copper Blasting Grit - Sponge medi...

      Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...