Factory directly Steel Grits For Blasting - Brown Fused Alumina – TAA
Factory directly Steel Grits For Blasting - Brown Fused Alumina – TAA Detail:
Features
Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation.
Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free.
Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine.
Technical specification
| Type | Item | Appearance | ||||
| Al2O3 | Fe2O3 | SiO2 | CaO | TiO2 | ||
| A | ≥95% | ≤0.3% | ≤1.5% | ≤0.45% | 1.5-3.8% | Brown particle |
| B | ≥90% | ≤0.3% | ≤1.5% | ≤0.45% | Black particle,grey powder | |
| C | ≥85% | ≤0.3% | ≤1.5% | ≤0.45% | ||
| D | ≥80% | ≤0.3% | ≤1.5% | ≤0.45% | ||
| E | ≥70% | ≤0.3% | ≤1.5% | ≤0.45% | ||
| Gravity | 4.6gr/cc | |||||
| Hardness | 9.0mohs | |||||
| Fusing Point | 2250℃ | |||||
| Density | 3.85g/cm3 | |||||
Applications
* Ship Repair and Building—Stainless steel sand blasting, outfifi eld sandblasting
* Marine Engineering—Stainless steel sand blasting, outfifi eld sandblasting
* Aerospace
* Non-ferrous Metal Casting and Forging
* Mold Making
Aluminum oxide is widely used in surface treatment before coating, descaling and deburring for aluminum alloy, stainless steel and other non-ferrous metal parts,mold cleaning, flatting and surface coarsening before metal spray painting for its high purity and high efficiency.
Product detail pictures:
Related Product Guide:
"Based on domestic market and expand overseas business" is our development strategy for Factory directly Steel Grits For Blasting - Brown Fused Alumina – TAA , The product will supply to all over the world, such as: UAE, Bahrain, Bahamas, Our stock have valued 8 million dollar , you can find the competitive parts within short delivery time. Our company is not only your partner in business, but also our company is your assistant in the coming corporation.
By Judy from Maldives - 2017.01.11 17:15
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Maud from Washington - 2018.07.26 16:51
Related products
-
Super Purchasing for Aluminium Oxide & Garn...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
-
Factory source 1.2mm Carbon Steel Cut Wire - Z...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
2018 China New Design Glass Beads 200# - Beari...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
-
China Supplier Glass Bead Blasting 60 Grit - A...
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Microhar...
-
Competitive Price for Brown Fused Alumina 80# -...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and ...
-
Top Suppliers Brown Fused Alumina Use - Brown ...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type It...
