Factory directly Thin Grinding Wheel - Grinding wheels FW-07 series – TAA
Factory directly Thin Grinding Wheel - Grinding wheels FW-07 series – TAA Detail:
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diamond tools
Advantages
Safty and environment friendly
Fast cutting and grinding, no break off, no pollution
· High efficiency
|
Number |
Picture |
Specification |
Safety Rotary Speed(r/min) |
Application |
Performance comparisons |
|
FW100-07 |
|
100×2.5×16 |
12000 |
Flat grinding and deburring of iron casting(ductile cast iron, Gray Cast iron) |
1. Grinding iron casting surface, TAA is over 70 times than resin disk, efficiency increased by 100% 2. Grinding steel structure weld area, TAA is 40 times than resin disk, efficiency increased by 100%. 3. Grinding fiber glass, TAA is 40 times than resin disk, efficiency increased by 100%. 4. Grinding marble and ceramic, TAA is 3 times than sintered cutter disk , efficiency increas
|
|
FW125-07 |
125×2.5×22.23 |
10000 |
|||
|
FW150-07 |
150×3.0×22.23 |
9500 |
|||
|
FW180-07 |
180×3.0×22.23 |
8500 |
|||
|
FW100-09 |
|
100×2.5×16 |
12000 |
Large aread grinding of iron casting (ductile cast iron, Gray Cast iron) |
|
|
FW125-09 |
125×2.5×22.23 |
10000 |
|||
|
FW150-09 |
150×3.0×22.23 |
9500 |
|||
|
FW180-09 |
180×3.0×22.23 |
8500 |
Improving efficiency of 30%-50% than traditional cutting disk
·Long service life
Using brazing technology,diamond on the surface not falling down
TAA diamond Grinding wheel
Product detail pictures:
Related Product Guide:
With advanced technologies and facilities, strict high quality regulate, reasonable price tag, excellent support and close co-operation with shoppers, we have been devoted to furnishing the best benefit for our buyers for Factory directly Thin Grinding Wheel - Grinding wheels FW-07 series – TAA , The product will supply to all over the world, such as: Malaysia, Buenos Aires, Mecca, To get more information about us as well as see all our products, please visit our website. To get more information please feel free to let us know. Thank you very much and wish your business always be great!
By Beryl from Ecuador - 2017.09.29 11:19
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Amy from Slovenia - 2017.11.20 15:58
Related products
-
Lowest Price for G80 Sponge Media Abrasives - ...
Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...
-
China New Product Bearing Alloy Steel Grit - G...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specification Chemica...
-
Factory source Stainless Steel Cut Wire Shot 0....
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
-
OEM Customized 14inch Cutting Disc - Cutting d...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Best quality Steel Shot S780 - Bearing steel g...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...
-
factory customized Flush Cut Diamond Blade - C...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
