Factory making Gp80 Bearing Steel Grit - Brown Fused Alumina – TAA
Factory making Gp80 Bearing Steel Grit - Brown Fused Alumina – TAA Detail:
Features
Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation.
Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free.
Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine.
Technical specification
| Type | Item | Appearance | ||||
| Al2O3 | Fe2O3 | SiO2 | CaO | TiO2 | ||
| A | ≥95% | ≤0.3% | ≤1.5% | ≤0.45% | 1.5-3.8% | Brown particle |
| B | ≥90% | ≤0.3% | ≤1.5% | ≤0.45% | Black particle,grey powder | |
| C | ≥85% | ≤0.3% | ≤1.5% | ≤0.45% | ||
| D | ≥80% | ≤0.3% | ≤1.5% | ≤0.45% | ||
| E | ≥70% | ≤0.3% | ≤1.5% | ≤0.45% | ||
| Gravity | 4.6gr/cc | |||||
| Hardness | 9.0mohs | |||||
| Fusing Point | 2250℃ | |||||
| Density | 3.85g/cm3 | |||||
Applications
* Ship Repair and Building—Stainless steel sand blasting, outfifi eld sandblasting
* Marine Engineering—Stainless steel sand blasting, outfifi eld sandblasting
* Aerospace
* Non-ferrous Metal Casting and Forging
* Mold Making
Aluminum oxide is widely used in surface treatment before coating, descaling and deburring for aluminum alloy, stainless steel and other non-ferrous metal parts,mold cleaning, flatting and surface coarsening before metal spray painting for its high purity and high efficiency.
Product detail pictures:
Related Product Guide:
Our products and solutions are greatly recognized and trustworthy by customers and may fulfill constantly changing financial and social requires for Factory making Gp80 Bearing Steel Grit - Brown Fused Alumina – TAA , The product will supply to all over the world, such as: Serbia, Jakarta, Denver, Facing fierce global market competition, we have launched the brand building strategy and updated the spirit of "human-oriented and faithful service", with an aim to gain global recognition and sustainable development.
By Renata from Sevilla - 2017.06.22 12:49
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Cornelia from Sierra Leone - 2018.06.05 13:10
Related products
-
Renewable Design for Sponge Media Abrasives G12...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not a...
-
2018 Good Quality Steel Shot Pellets - Copper ...
Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...
-
2018 New Style Air Grinder Cutting Disc - Cutt...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Excellent quality Steel Grit Gp120 - Steel Gri...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelti...
-
Massive Selection for Jet Cut Off Wheel - Cutt...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Trending Products Walking Beam Shot Blast Machi...
Advantages of Track-passing shot blasting machine * Reliable blasting technology: Our high performance turbine units are very reliable. They are highly effficient due to the low number of wearing parts, maintenance-friendly design and high abrasive flow rate. * Low maintenance: Regular maintenance helps maintain the value of the machines. Large maintenance doors provide easy access to all essential components and facilitate the rapid replacement of wearing parts. * Innovative filter technolog...
