Factory making Stainless Steel Shot Abrasive - Low Carbon Steel Shot – TAA
Factory making Stainless Steel Shot Abrasive - Low Carbon Steel Shot – TAA Detail:
Product feature
High strengthen, high tenacity, long service life.
Low breakage, low dust, low pollution.
Low wear of the equipments, long life of accessory.
Reduce dedusting system load, lengthen usage time of dedusting equipments.
Technical specification
Chemical Composition% |
C |
0.10-0.20% |
Si |
0.10-0.35% |
|
Mn |
0.35-1.50% |
|
S |
≤0.05% |
|
P |
≤0.05% |
|
Other alloy elements |
Adding Cr Mo Ni B Al Cu etc. |
|
Hardness |
HRC42-48/48-54 |
|
Microstructure |
Duplex structure combined Martensite and Bainite |
|
Density |
≥ 7.2g/cm3 |
|
External form |
Spherical |
Size distribution
Screen No. | Inch | Screen size | S70 | S110 | S170 | S230 | S280 | S330 | S390 | S460 | S550 | S660 | S780 | S930 |
6 | 0.132 | 3.35 | All pass | |||||||||||
7 | 0.111 | 2.80 | All pass | |||||||||||
8 | 0.0937 | 2.36 | All pass | ≥90% | ||||||||||
10 | 0.0787 | 2.00 | All pass | All pass | ≥85% | ≥97% | ||||||||
12 | 0.0661 | 1.70 | All pass | ≤5% | ≥85% | ≥97% | ||||||||
14 | 0.0555 | 1.40 | All pass | ≤5% | ≥85% | ≥97% | ||||||||
16 | 0.0469 | 1.18 | All pass | ≤5% | ≥85% | ≥97% | ||||||||
18 | 0.0394 | 1.00 | All pass | ≤5% | ≥85% | ≥96% | ||||||||
20 | 0.0331 | 0.850 | All pass | ≤10% | ≥85% | ≥96% | ||||||||
25 | 0.0280 | 0.710 | ≤10% | ≥85% | ≥96% | |||||||||
30 | 0.0232 | 0.600 | All pass | ≥85% | ≥96% | |||||||||
35 | 0.0197 | 0.500 | ≤10% | ≥97% | ||||||||||
40 | 0.0165 | 0.425 | All Pass | ≥85% | ||||||||||
45 | 0.0138 | 0.355 | ≤10% | ≥97% | ||||||||||
50 | 0.0117 | 0.300 | ≥80% | |||||||||||
80 | 0.007 | 0.180 | ≥80% | ≥90% | ||||||||||
120 | 0.0049 | 0.125 | ≥90% | |||||||||||
200 | 0.0029 | 0.075 |
Fatigue Life Test
Consumption Contrast Figure of TAA LCB steel shot, low-carbon steel shot and high-carbon steel shot.(fatigue life test of normal grades at an impacting speed ratio of 60.96m/s)
Consumption contrast-Normal grade
Through the fatigue life test we can see that: the service life of TAA LCB Steel Shot is 1.5 times longer than common low carbon steel shot, 2 times longer than high carbon steel shot.
Application
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Shot peening: Shot peening of gear, heat treated parts.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.
Product detail pictures:
Related Product Guide:
To regularly increase the management program by virtue from the rule of "sincerely, good religion and high quality are the base of enterprise development", we greatly absorb the essence of linked products internationally, and constantly produce new goods to satisfy the calls for of shoppers for Factory making Stainless Steel Shot Abrasive - Low Carbon Steel Shot – TAA , The product will supply to all over the world, such as: belarus, Mumbai, Nepal, We only supply quality products and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom products etc that can according to customer's requirement.
By Margaret from Canada - 2017.09.29 11:19
This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
By Deborah from Puerto Rico - 2017.09.29 11:19