Factory Promotional Zinc Cut Wire 0.5mm - Steel Grit – TAA
Factory Promotional Zinc Cut Wire 0.5mm - Steel Grit – TAA Detail:
Available Hardness:
GP: HRC46-50
Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment.
GL: HRC56-60
Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.
GH: HRC63-65
High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment.
Production Strength:
TAA adopts Arc Furnace Smelting and Double Quenching technology, which guarantee its metal abrasives’ chemical composition and high strength, high tenacity, long service life.
Tech Data: Steel Grit
|
Chemical Composition% |
C |
0.85-1.2 |
|
Si |
0.40-1.2 |
|
|
Mn |
0.60-1.2 |
|
|
S |
≤0.050 |
|
|
P |
≤0.050 |
|
|
Hardness |
GP |
HRC 46-50 |
|
GL |
HRC 53-60 |
|
|
GH |
HRC 63-65 |
|
|
Density |
≥7.4 g/cm3 |
|
|
microstructure |
Homogeneous tempered martensite or Troostite |
|
|
Appearance |
Angular |
|
Size distribution
|
Screen No. |
In |
Screen Size |
SAE J444 |
|||||||||
|
G10 |
G12 |
G14 |
G16 |
G18 |
G25 |
G40 |
G50 |
G80 |
G120 |
|||
|
6 |
0.132 |
3.35 |
|
|
|
|
|
|
|
|
|
|
|
7 |
0.111 |
2.80 |
All Pass |
|
|
|
|
|
|
|
|
|
|
8 |
0.0937 |
2.36 |
|
All Pass |
|
|
|
|
|
|
|
|
|
10 |
0.0787 |
2.00 |
≥80% |
|
All Pass |
|
|
|
|
|
|
|
|
12 |
0.0661 |
1.70 |
≥90% |
≥80% |
|
All Pass |
|
|
|
|
|
|
|
14 |
0.0555 |
1.40 |
|
≥90% |
≥80% |
|
All Pass |
|
|
|
|
|
|
16 |
0.0469 |
1.18 |
|
|
≥90% |
≥75% |
|
All Pass |
|
|
|
|
|
18 |
0.0394 |
1.00 |
|
|
|
≥85% |
≥75% |
|
All |
|
|
|
|
20 |
0.0331 |
0.850 |
|
|
|
|
|
|
|
|
|
|
|
25 |
0.0280 |
0.710 |
|
|
|
|
≥85% |
≥70% |
|
All Pass |
|
|
|
30 |
0.0232 |
0.600 |
|
|
|
|
|
|
|
|
|
|
|
35 |
0.0197 |
0.500 |
|
|
|
|
|
|
|
|
|
|
|
40 |
0.0165 |
0.425 |
|
|
|
|
|
≥80% |
≥70% |
|
All Pass |
|
|
45 |
0.0138 |
0.355 |
|
|
|
|
|
|
|
|
|
|
|
50 |
0.0117 |
0.300 |
|
|
|
|
|
|
≥80% |
≥65% |
|
All Pass |
|
80 |
0.007 |
0.180 |
|
|
|
|
|
|
|
≥75% |
≥65% |
|
|
120 |
0.0049 |
0.125 |
|
|
|
|
|
|
|
|
≥75% |
≥60% |
|
200 |
0.0029 |
0.075 |
|
|
|
|
|
|
|
|
|
≥75% |
Application
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.
Product detail pictures:
Related Product Guide:
We generally continually give you quite possibly the most conscientious shopper company, and the widest variety of designs and styles with finest materials. These endeavours include the availability of customized designs with speed and dispatch for Factory Promotional Zinc Cut Wire 0.5mm - Steel Grit – TAA , The product will supply to all over the world, such as: Seattle, United Arab Emirates, Nepal, With strong technical strength and advanced production equipment, and SMS people purposefully , professional, dedicated spirit of enterprise. Enterprises took the lead through the ISO 9001:2008 international quality management system certification, CE certification EU ; CCC.SGS.CQC other related product certification. We look forward to reactivating our company connection.
By Rebecca from Lahore - 2017.05.02 11:33
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
By Elizabeth from Yemen - 2018.05.15 10:52
Related products
-
High definition Fiberglass Grinding Discs - Cu...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
OEM manufacturer Gh120 Steel Grit - Bearing st...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...
-
Newly Arrival Aluminum Cut Wire 2.5mm - Glass ...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specification Chemica...
-
China Factory for High Carbon Material Steel Sh...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
Wholesale Stainless Steel Grit Sandblasting - ...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and ...
-
Manufacturer for Stainless Steel Beads For Blas...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
