Factory Supply Copper Cut Wire Shot - Brown Fused Alumina – TAA
Factory Supply Copper Cut Wire Shot - Brown Fused Alumina – TAA Detail:
Features
Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation.
Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free.
Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine.
Technical specification
| Type | Item | Appearance | ||||
| Al2O3 | Fe2O3 | SiO2 | CaO | TiO2 | ||
| A | ≥95% | ≤0.3% | ≤1.5% | ≤0.45% | 1.5-3.8% | Brown particle |
| B | ≥90% | ≤0.3% | ≤1.5% | ≤0.45% | Black particle,grey powder | |
| C | ≥85% | ≤0.3% | ≤1.5% | ≤0.45% | ||
| D | ≥80% | ≤0.3% | ≤1.5% | ≤0.45% | ||
| E | ≥70% | ≤0.3% | ≤1.5% | ≤0.45% | ||
| Gravity | 4.6gr/cc | |||||
| Hardness | 9.0mohs | |||||
| Fusing Point | 2250℃ | |||||
| Density | 3.85g/cm3 | |||||
Applications
* Ship Repair and Building—Stainless steel sand blasting, outfifi eld sandblasting
* Marine Engineering—Stainless steel sand blasting, outfifi eld sandblasting
* Aerospace
* Non-ferrous Metal Casting and Forging
* Mold Making
Aluminum oxide is widely used in surface treatment before coating, descaling and deburring for aluminum alloy, stainless steel and other non-ferrous metal parts,mold cleaning, flatting and surface coarsening before metal spray painting for its high purity and high efficiency.
Product detail pictures:
Related Product Guide:
We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Factory Supply Copper Cut Wire Shot - Brown Fused Alumina – TAA , The product will supply to all over the world, such as: Afghanistan, Kuwait, Singapore, Now, we are trying to enter new markets where we do not have a presence and developing the markets we have the already penetrated. On account of superior quality and competitive price , we will be the market leader, please don’t hesitate to contact us by phone or email, if you are interested in any of our products.
By Amelia from belarus - 2018.09.23 18:44
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Jean Ascher from Eindhoven - 2018.02.12 14:52
Related products
-
Quality Inspection for Cut Off Wheel Price - C...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Lowest Price for Shot Peening On Steel - Steel...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
-
Good Quality 180# Glass Beads - Aluminum cut w...
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Mic...
-
2018 High quality Gl40 Bearing Steel Grit - St...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
Big Discount Steel Shot Grit - Steel Grit R...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelti...
-
Original Factory White Fused Aluminum Oxide Use...
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Mic...
