• product-bg
  • product-bg

Featured

  • Lowest Price for Glass Bead Abrasive Blasting - Steel Grit – TAA

    Lowest Price for Glass Bead Abrasive Blasting - Steel Grit – TAA

    Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
  • Good quality Diamond Cup Grinding Disc - Cutting disc FS-05 series – TAA

    Good quality Diamond Cup Grinding Disc - Cutting disc FS-05 series – TAA

    Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
  • Factory source Stainless Steel Cut Wire Shot 0.6mm - Brown Fused Alumina – TAA

    Factory source Stainless Steel Cut Wire Shot 0.6mm - Brown Fused Alumina – TAA

    Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...
  • Hot sale Steel Grit Gp40 - Zinc cut wire – TAA

    Hot sale Steel Grit Gp40 - Zinc cut wire – TAA

    Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
  • Factory wholesale Shot Beads - Carbon steel cut wire shot – TAA

    Factory wholesale Shot Beads - Carbon steel cut wire shot – TAA

    We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life.  Item Technical index Chemi...
  • OEM manufacturer 0.7mm Carbon Steel Cut Wire - Low Carbon Steel Shot – TAA

    OEM manufacturer 0.7mm Carbon Steel Cut Wire - Low Carbon Steel Shot – TAA

    Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
  • Hot sale Flap Disc Grinding Wheels - Grinding wheels FW-09 series – TAA

    Hot sale Flap Disc Grinding Wheels - Grinding wheels FW-09 series – TAA

    Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
  • Wholesale Price Stainless Steel Grit Blast Media - Stainless steel grit – TAA

    Wholesale Price Stainless Steel Grit Blast Media - Stainless steel grit – TAA

    Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...
  • Discount Price Brown Fused Aluminum Oxide Powder - Steel Shot – TAA

    Discount Price Brown Fused Aluminum Oxide Powder - Steel Shot – TAA

    Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50  Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35                       All pass 7 0.111 2.80                     All pass   8 0.0937 2.36                   All...
  • Low price for Automatic Shot Blasting Machine - Steel Mill Tumble Belt Shot Blast Machines – TAA

    Low price for Automatic Shot Blasting Machine - Steel Mill Tumble Belt Shot Blast Machines – TAA

    Steel mill tumble belt shot blast machines are used for deburring,descaling, sand removal and derusting mass parts. They are operated either as a stand-alone solution or as part of a line. In addition to the standard program, delivers this machine in several sizes and designs. The machines are equipped with the tried and tested high-performance turbines and the maintenance-friendly cartridge filter systems. Decisive Advantages of Steel mill tumble belt shot blast machines: AGTOS Blasting tech...
  • Factory selling Gp16 Bearing Steel Grit - Carbon steel cut wire shot – TAA

    Factory selling Gp16 Bearing Steel Grit - Carbon steel cut wire shot – TAA

    We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life.  Item Technical index Chemi...
  • Factory wholesale S330 Steel Shot - Aluminum cut wire – TAA

    Factory wholesale S330 Steel Shot - Aluminum cut wire – TAA

    Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Microhar...