• product-bg
  • product-bg

Featured

  • Discount Price Steel Grit Price - Stainless steel cut wire shot – TAA

    Discount Price Steel Grit Price - Stainless steel cut wire shot – TAA

    Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
  • OEM Manufacturer Soft Sponge Media - Garnet – TAA

    OEM Manufacturer Soft Sponge Media - Garnet – TAA

    Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...
  • OEM/ODM Supplier High Purity Copper Cut Wire Shot - Sponge media abrasives – TAA

    OEM/ODM Supplier High Purity Copper Cut Wire Shot - Sponge media abrasives – TAA

    Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
  • Personlized Products Bearing Steel Grit G120 - Copper cut wire – TAA

    Personlized Products Bearing Steel Grit G120 - Copper cut wire – TAA

    Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...
  • New Arrival China Proper Grit To Blast Stainless Steel - Sponge media abrasives – TAA

    New Arrival China Proper Grit To Blast Stainless Steel - Sponge media abrasives – TAA

    Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
  • Bottom price 70/100 Mesh Garnet - Steel Shot – TAA

    Bottom price 70/100 Mesh Garnet - Steel Shot – TAA

    Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50  Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35                       All pass 7 0.111 2.80                     All pass   8 0.0937 2.36                   All...
  • Ordinary Discount Zinc Cut Wire - Low Carbon Steel Shot – TAA

    Ordinary Discount Zinc Cut Wire - Low Carbon Steel Shot – TAA

    Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
  • Leading Manufacturer for Grinding Wheel For Hss - Cutting disc FS-03 series – TAA

    Leading Manufacturer for Grinding Wheel For Hss - Cutting disc FS-03 series – TAA

    Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
  • China wholesale Cast Alloy Shot - Steel Shot – TAA

    China wholesale Cast Alloy Shot - Steel Shot – TAA

    Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50  Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35                       All pass 7 0.111 2.80                     All pass   8 0.0937 2.36                   All...
  • China OEM Cutting Disc - Cutting disc FS-03 series – TAA

    China OEM Cutting Disc - Cutting disc FS-03 series – TAA

    Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
  • Factory Free sample Carbon Steel Cut Wire 0.4mm - Stainless steel cut wire shot – TAA

    Factory Free sample Carbon Steel Cut Wire 0.4mm - Stainless steel cut wire shot – TAA

    Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
  • Hot New Products Bearing Steel Grit Gh14 - Steel Shot – TAA

    Hot New Products Bearing Steel Grit Gh14 - Steel Shot – TAA

    Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50  Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35                       All pass 7 0.111 2.80                     All pass   8 0.0937 2.36                   All...