Fixed Competitive Price 2.0mm Aluminum Cut Wire - Glass beads – TAA
Fixed Competitive Price 2.0mm Aluminum Cut Wire - Glass beads – TAA Detail:
Advantage
■ clean and smooth, not hurt to the mechanical precision of work piece.
■ high mechanical intensity, hardness, flexibility
■ it can be reused several times, the same effect and is not easily broken.
■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark.
■ high purity and good quality meet the international standard.
■ stable chemistry property, not pollute the metal processed.
Technical specification
|
Chemical Analysis |
Physical Properties |
||
|
SiO2 |
≥65.0% |
Bulk Density |
1.5g/cm3 |
|
Na2O |
≤14.0% |
Real Density |
2.5g/cm3 |
|
CaO |
≤8.0% |
Mohs Hardness |
6-7 |
|
MgO |
≥2.5% |
HRC hardness |
16 |
|
AL2O3 |
0.5-2.0% |
Roundness |
≥92.5% |
|
Fe2O3 |
≥0.15% |
Bubble |
≤10% |
|
Other |
2.0% |
|
|
Grades/Sizes of glass bead for sand blasting media
|
Type |
Mesh |
Diameter(um) |
|
30# |
20-40 |
850-425 |
|
40# |
30-40 |
600-425 |
|
60# |
40-60 |
425-250 |
|
80# |
60-100 |
250-150 |
|
100# |
70-140 |
210-105 |
|
120# |
100-140 |
150-100 |
|
150# |
100-200 |
150-70 |
|
180# |
140-200 |
105-70 |
|
220# |
140-270 |
105-50 |
|
280# |
200-325 |
70-45 |
|
320# |
<325 |
<44 |
Applications
1. used for semi-luster surface treatment of stainless steel products.
2. used for cleaning of mould such as forging dies, rubber, plastic, metal casting, extrusion & stamping dies etc.
3. to clear tensile stress of various parts, increase the fatigue life and corrosive power.
4. used for cleaning and removing the flash, burr of integrate circuit and semiconductor device.
5. used for shot peening of medical equipment, textile machinery and all kinds of hardware products etc.
6. used for cleaning and removing burr of all kinds of metal tube, non-ferrous alloy precision casting etc.
Product detail pictures:
Related Product Guide:
We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Fixed Competitive Price 2.0mm Aluminum Cut Wire - Glass beads – TAA , The product will supply to all over the world, such as: Melbourne, Dominica, Maldives, We will do our utmost to cooperate & satisfied with you relying on top-grade quality and competitive price and best after service ,sincerely look forward to cooperating with you and make achievements in the future!
By Marco from Spain - 2017.07.28 15:46
Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!
By Betsy from Ghana - 2017.03.08 14:45
Related products
-
OEM Factory for 0.4mm Carbon Steel Cut Wire - ...
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Mic...
-
China OEM Wet Cutting Diamond Blade - Cutting ...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
OEM Manufacturer Gh25 Steel Grit - Aluminum cu...
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Mic...
-
High reputation Abrasive Blasting Machine - Ha...
As a rule, hanger-type blast machines are offered either for batch or continuous processing. However, there are many intermediate designs that are oriented towards different kinds of overhead conveyor systems. In many cases, different processes such as blasting, painting and subsequent drying can be interconnected via the overhead conveyor system. This makes it possible to tap an enormous potential for streamlining the process workflow. Additional processing variants are created by using diff...
-
Special Design for 430 Stainless Steel Cut Wire...
We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life. Item Technical index Chemi...
-
Factory best selling Rough Grinding Wheel - Gr...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
