• product-bg
  • product-bg

Free sample for Carbon Steel Cut Wire 0.3mm - Zinc cut wire – TAA

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Dedicated to strict high-quality management and considerate shopper company, our experienced team associates are normally available to discuss your requirements and ensure full shopper gratification for Steel Shot Beads, Bearing Steel Grit Gl120, Aluminum Cut Wire 1.0mm, Our hugely specialized process eliminates the component failure and offers our consumers unvarying high quality, allowing us to control cost, plan capacity and maintain consistent on time delivery.
Free sample for Carbon Steel Cut Wire 0.3mm - Zinc cut wire – TAA Detail:

Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot.
These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives.

Features

1. Bright colour and lustre
2. Compact structure
3. Little impurity and high purity
4. No premature breakdown or flaking
5. Less dust than either steel or aluminum abrasives
6. Durability: 6500 times

Technological Index

Product Description

Zinc Cut Wire Shot

Chemical Composition

Zn≥99.9%

Microhardness

35~45HV

Tensile Intensity

90~120Mpa

Durability

6500 Times

Microstructure

Deformed α

Density

7.1 g/cm3

Bulk Density

4.1g/cm3

Hardness

As cut:38-55HV

Conditioned:45-60HV

Available sizes
1. Zinc cut wire: 1.5mm  1.8mm  2.0mm  2.5mm  3.0mm
2. Zinc Shot:   0.3mm  0.4mm  0.5mm  0.6mm  0.8mm

Shapes: As cut(cylindrical), conditioned(rounded)

Application

It is used for removing oxidation skin, burr, eliminating surface defect, removing stress, etching, strengthen, prevention rust before painting of metal die-casting, precision casting, hardware tool, machinery manufacturing, automobile spare parts, apparatus and pump valves. 


Product detail pictures:

Free sample for Carbon Steel Cut Wire 0.3mm - Zinc cut wire – TAA detail pictures


Related Product Guide:

Our purpose would be to offer good quality products at competitive price ranges, and top-notch support to clients around the whole world. We're ISO9001, CE, and GS certified and strictly adhere to their good quality specifications for Free sample for Carbon Steel Cut Wire 0.3mm - Zinc cut wire – TAA , The product will supply to all over the world, such as: panama, London, Nepal, You can let us know your idea to develop unique design for your own model to prevent too much similar parts in the market! We will provide our best service to satisfy all your needs! You should contact us right away!
  • Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.
    5 Stars By Ophelia from Pretoria - 2017.03.28 16:34
    It can be said that this is a best producer we encountered in China in this industry, we feel lucky to work with so excellent manufacturer.
    5 Stars By Jonathan from Chile - 2018.02.08 16:45
    Write your message here and send it to us

    Related products

    • Manufacturing Companies for Cast Steel Shot S280 - Stainless steel grit – TAA

      Manufacturing Companies for Cast Steel Shot S28...

      Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * ...

    • Hot Sale for Stainless Steel Shot Peening Media - Garnet – TAA

      Hot Sale for Stainless Steel Shot Peening Media...

      Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...

    • Factory Promotional Zinc Cut Wire 0.5mm - Copper cut wire – TAA

      Factory Promotional Zinc Cut Wire 0.5mm - Copp...

      Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...

    • Super Lowest Price Glass Bead Blasting Chrome - Sponge media abrasives – TAA

      Super Lowest Price Glass Bead Blasting Chrome -...

      Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...

    • Factory Promotional Buy Glass Beads Online - Low Carbon Steel Shot – TAA

      Factory Promotional Buy Glass Beads Online - L...

      Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...

    • Top Quality Aluminum Cut Wire Shot Suppliers - Zinc cut wire – TAA

      Top Quality Aluminum Cut Wire Shot Suppliers -...

      Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...