• product-bg
  • product-bg

Leading Manufacturer for Aluminum Oxide Fused - Copper cut wire – TAA

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We usually think and practice corresponding for the change of circumstance, and grow up. We aim at the achievement of a richer mind and body as well as the living for 1.0mm Carbon Steel Cut Wire, Bearing Steel Grit Gp18, Steel Grit Gl/Gh/Gp, Trust us and you will gain more. Please feel free to contact us for more information, we assure you of our best attention at all times.
Leading Manufacturer for Aluminum Oxide Fused - Copper cut wire – TAA Detail:

Tech Data

Product Description

Copper Cut Wire Shot

Chemical Composition

Cu: 58-99%, the rest is Zn

Microhardness

110~300HV

Tensile Intensity

200~500Mpa

Durability

5000 Times

Microstructure

Deformed αorα+β

Density

8.9 g/cm3

Bulk Density

5.1 g/cm3

Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc.

Advantage

1. Long life time
2. Less Dust
3. Specific gravity higher than other blasting beads
4. Lower hardness than steel shot &glass beads
5. Shape: Cylindrical/rounded

Application

1.  for new and old steel outdoor surface cleaning, descaling, strengthen.
2. as a wear-resistant flooring aggregate, hard floor tiles can be made for the square, garages and other non-slip floor.
3. for counterweight sand, such as cement plants.
4. through after fine processing, suitable for all kinds of denim spray and spray more sophisticated use.
5. the abrasive material (sand, hard abrasive paper, sandpaper, emery cloth).

It is widely used in surface treatment such as descaling, burr removing, elimination of surface defects, internal stress relief, etching, matte, leveling, strengthening and rust prevention before applying in the metal die castings, precision castings, hardware & tools, machinery manufacturing, auto parts, instruments & meters, pumps and valves industries.


Product detail pictures:

Leading Manufacturer for Aluminum Oxide Fused - Copper cut wire – TAA detail pictures

Leading Manufacturer for Aluminum Oxide Fused - Copper cut wire – TAA detail pictures

Leading Manufacturer for Aluminum Oxide Fused - Copper cut wire – TAA detail pictures

Leading Manufacturer for Aluminum Oxide Fused - Copper cut wire – TAA detail pictures


Related Product Guide:

We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for Leading Manufacturer for Aluminum Oxide Fused - Copper cut wire – TAA , The product will supply to all over the world, such as: Romania, Tunisia, Greece, We welcome customers from all over the world come to discuss business. We supply high quality solutions, reasonable prices and good services. We hope to sincerely build business relationships with customers from at home and abroad, jointly striving for a resplendent tomorrow.
  • This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
    5 Stars By Joa from Vancouver - 2018.10.31 10:02
    The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
    5 Stars By Andrew Forrest from Portugal - 2018.12.11 14:13
    Write your message here and send it to us

    Related products

    • Wholesale Price China 1.2mm Copper Cut Wire Shot - Carbon steel cut wire shot – TAA

      Wholesale Price China 1.2mm Copper Cut Wire Sho...

      We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life.  Item Technical index ...

    • Factory Supply 125mm Grinding Wheel - Grinding wheels FW-09 series – TAA

      Factory Supply 125mm Grinding Wheel - Grinding...

      Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...

    • Short Lead Time for S280 Low Carbon Steel Shot - Garnet – TAA

      Short Lead Time for S280 Low Carbon Steel Shot ...

      Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...

    • OEM/ODM China Ervin Stainless Steel Grit - Garnet – TAA

      OEM/ODM China Ervin Stainless Steel Grit - Gar...

      Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not a...

    • OEM Factory for 16# Sponge Media Abrasives - Garnet – TAA

      OEM Factory for 16# Sponge Media Abrasives - G...

      Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not a...

    • Chinese Professional High Purity Cut Wire Zinc Shot - Carbon steel cut wire shot – TAA

      Chinese Professional High Purity Cut Wire Zinc ...

      We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life.  Item Technical index ...