• product-bg
  • product-bg

Massive Selection for Aluminum Wire Shots - Sponge media abrasives – TAA

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With our superb management, potent technical capability and strict quality command procedure, we go on to provide our shoppers with trustworthy high-quality, reasonable costs and outstanding services. We goal at becoming considered one of your most trustworthy partners and earning your pleasure for 1.2mm Aluminum Cut Wire, Steel Grit Gl25, G16 Steel Grit, Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now.
Massive Selection for Aluminum Wire Shots - Sponge media abrasives – TAA Detail:

Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting.

The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit.

Type Profiles Abrasive Media Agent Application
TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings.
TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron.
TAA-S#30 ±50 micron Aluminum Oxide#80 Effective for one or two laryers coatings and profile to50 micron.
TAA-S#30 ±25 micron Aluminum Oxide#120 Effective on light and moderate rust, producing 25 micron profile.
TAA-S#30 <25 micron Aluminum Oxide#220 For light coatings removal or to leave minor surface profiling.
TAA-G-40 +100 micron Steel Grit G40 Removal the toughest coating. For surface preparation on deteriorated surfaces and for removing elastomeric or other extremely thich coatings.

Features

1.  Sponge media abrasives manufactured with polyurethane sponge is low breakage and longer lasting and could well suppress dust pollution which normally resulted from the abrasives breakage.
2.  The sponge material absorbs the surface contaminants (mill scale, grease, etc) and thus improves the cleanness of the subject surface.
3.  Worker safety is enhanced and risks such as eye and industrial injury is reduced due to low rebound of the porous sponge.
4.  Less quality defects and low reworking
5.  High quality surface treatment of sensitive and defined area
6.  Coating lasting longer, reducing maintaining cost.
7.  Recycling
8.  Its sand blasting equipment is small in size and portable and suitable for surface cleaning of narrow area and special part.
9. This environment friendly, safe and high efficient new abrasive brings about clean, quite and visible work sites.

Operating principle

Sponge media abrasives0101

1. Dual-component sponge media abrasive are propoed to the surface using an air-doven system
2. Blasting of sponge media abrasive
* Absorb collision energy, flattened and suppress the release of loosened surface contaminants
* Expose the abrasive, remove surface contanη inants
3. When leaving the surface, the Sponge media abrasives expands back to normal size creating a vacuum which absorbs most of the dusts and contaminants

Applications

Widely used in Marine, Offshore Engineering, Military, Petrochemical Project, Aerospace & Aviation, Nuclear Power, Historic Restoration, Wall Cleaning, Building Maintenance etc.


Product detail pictures:

Massive Selection for Aluminum Wire Shots - Sponge media abrasives – TAA detail pictures

Massive Selection for Aluminum Wire Shots - Sponge media abrasives – TAA detail pictures


Related Product Guide:

The company upholds the philosophy of "Be No.1 in quality, be rooted on credit and trustworthiness for growth", will continue to serve old and new customers from home and overseas whole-heatedly for Massive Selection for Aluminum Wire Shots - Sponge media abrasives – TAA , The product will supply to all over the world, such as: Honduras, Cambodia, Wellington, So far our products have been exported to east Europe, the Middle East, Southeast, Africa and South America etc. We have 13years professional sales and purchase in Isuzu parts at home and abroad and the ownership of the modernized electronic Isuzu parts checking systems. We honor our core principal of Honesty in business, priority in service and will do our best to offer our customers with high quality products and excellent service.
  • This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
    5 Stars By Bertha from Mongolia - 2018.09.21 11:44
    A good manufacturers, we have cooperated twice, good quality and good service attitude.
    5 Stars By Amelia from Honduras - 2018.12.11 14:13
    Write your message here and send it to us

    Related products

    • Wholesale Dealers of Cast Steel Shot For Surface Treatment - Bearing steel grit – TAA

      Wholesale Dealers of Cast Steel Shot For Surfac...

      Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...

    • China Cheap price Dry Cut Diamond Blade - Cutting disc FS-05 series – TAA

      China Cheap price Dry Cut Diamond Blade - Cutt...

      Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...

    • Factory For Diamond Wheel Tile Cutter - Grinding wheels FW-09 series – TAA

      Factory For Diamond Wheel Tile Cutter - Grindi...

      Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...

    • Factory making G16 Steel Grit - Steel Grit – TAA

      Factory making G16 Steel Grit - Steel Grit ...

      Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.  GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelti...

    • High Quality 200# Glass Beads - Stainless steel cut wire shot – TAA

      High Quality 200# Glass Beads - Stainless stee...

      Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...

    • 2018 High quality Double Disc Grinding - Grinding wheels FW-07 series – TAA

      2018 High quality Double Disc Grinding - Grind...

      Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...