• product-bg
  • product-bg

New Fashion Design for Low Carbon Steel Shot S780 - Sponge media abrasives – TAA

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Dedicated to strict quality management and thoughtful client services, our experienced staff customers are generally available to discuss your demands and guarantee full client pleasure for Aluminum Cut Wire 0.6mm, Low Carbon Steel Shot S170, Shot Blasting Abrasive, We are not satisfied with the present achievements but we are trying best to innovate to meet buyer's more personalized needs. No matter where you are from, we are here to wait for your kind request, and welcom to visit our factory. Choose us, you can meet your reliable supplier.
New Fashion Design for Low Carbon Steel Shot S780 - Sponge media abrasives – TAA Detail:

Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting.

The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit.

Type Profiles Abrasive Media Agent Application
TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings.
TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron.
TAA-S#30 ±50 micron Aluminum Oxide#80 Effective for one or two laryers coatings and profile to50 micron.
TAA-S#30 ±25 micron Aluminum Oxide#120 Effective on light and moderate rust, producing 25 micron profile.
TAA-S#30 <25 micron Aluminum Oxide#220 For light coatings removal or to leave minor surface profiling.
TAA-G-40 +100 micron Steel Grit G40 Removal the toughest coating. For surface preparation on deteriorated surfaces and for removing elastomeric or other extremely thich coatings.

Features

1.  Sponge media abrasives manufactured with polyurethane sponge is low breakage and longer lasting and could well suppress dust pollution which normally resulted from the abrasives breakage.
2.  The sponge material absorbs the surface contaminants (mill scale, grease, etc) and thus improves the cleanness of the subject surface.
3.  Worker safety is enhanced and risks such as eye and industrial injury is reduced due to low rebound of the porous sponge.
4.  Less quality defects and low reworking
5.  High quality surface treatment of sensitive and defined area
6.  Coating lasting longer, reducing maintaining cost.
7.  Recycling
8.  Its sand blasting equipment is small in size and portable and suitable for surface cleaning of narrow area and special part.
9. This environment friendly, safe and high efficient new abrasive brings about clean, quite and visible work sites.

Operating principle

Sponge media abrasives0101

1. Dual-component sponge media abrasive are propoed to the surface using an air-doven system
2. Blasting of sponge media abrasive
* Absorb collision energy, flattened and suppress the release of loosened surface contaminants
* Expose the abrasive, remove surface contanη inants
3. When leaving the surface, the Sponge media abrasives expands back to normal size creating a vacuum which absorbs most of the dusts and contaminants

Applications

Widely used in Marine, Offshore Engineering, Military, Petrochemical Project, Aerospace & Aviation, Nuclear Power, Historic Restoration, Wall Cleaning, Building Maintenance etc.


Product detail pictures:

New Fashion Design for Low Carbon Steel Shot S780 - Sponge media abrasives – TAA detail pictures

New Fashion Design for Low Carbon Steel Shot S780 - Sponge media abrasives – TAA detail pictures


Related Product Guide:

Our growth depends on the superior equipment ,exceptional talents and continuously strengthened technology forces for New Fashion Design for Low Carbon Steel Shot S780 - Sponge media abrasives – TAA , The product will supply to all over the world, such as: Peru, Morocco, Norway, Till now, the goods list has been updated regularly and attracted clients from around the globe. Detailed facts is often obtained in our web-site and you'll be served with premium quality consultant service by our after-sale group. They are going to help you get comprehensive acknowledge about our products and make a satisfied negotiation. Company go to to our factory in Brazil is also welcome at any time. Hope to obtain your inquiries for any pleased co-operation.
  • The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
    5 Stars By Phoenix from Saudi Arabia - 2018.09.12 17:18
    The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
    5 Stars By Muriel from Cancun - 2018.06.03 10:17
    Write your message here and send it to us

    Related products

    • High Quality for Steel Grit Gh25 - Steel Shot – TAA

      High Quality for Steel Grit Gh25 - Steel Shot ...

      Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50  Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35                       All pass 7 0.111 2.80                     All pass   8 0.0937 2.36                   All...

    • OEM Manufacturer Gh25 Steel Grit - Aluminum cut wire – TAA

      OEM Manufacturer Gh25 Steel Grit - Aluminum cu...

      Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Mic...

    • OEM China Blasting Steel Shot - Brown Fused Alumina – TAA

      OEM China Blasting Steel Shot - Brown Fused Al...

      Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...

    • China Factory for High Carbon Material Steel Shot - Stainless steel grit – TAA

      China Factory for High Carbon Material Steel Sh...

      Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...

    • Cheapest Factory Diamond Cut Grinding Wheel - Cutting disc FS-03 series – TAA

      Cheapest Factory Diamond Cut Grinding Wheel - ...

      Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...

    • China Gold Supplier for 410 Stainless Steel Cut Wire Shot 0.6mm - Bearing steel grit – TAA

      China Gold Supplier for 410 Stainless Steel Cut...

      Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...