Steel cut wire, mainly in two kinds of shapes-As cut or conditioned round.

As cut            G1 Conditioned       G2 Conditioned      G3 Conditioned

Steel cut wire kinds:

Steel cut wire can be made from new steel wire and old tire wire both.

Usually steel cut wire made from old tire are mainly 1.0mm, 1.2mm and 1.5mm, Hardness of it is no more than HRC48.

Steel cut wire made from new steel wire also be named as carbon steel cut wire. Its hardness range is HRC40-HRC57. Blasting result is better. And also can be used for shot peening.

Technical date sheet of carbon steel cut wire:

Item		Technical index
Chemical Composition%	C	0.45-0.85%
	Si	0.15-0.55%
	Mn	0.30-1.30%
	S	≤0.05%
	P	≤0.04%
	Alloy elements	appropriate amount
Hardness		HRC38-50/50-55/55-60/58-63/60-65
Microstructure		Deformation pearlite
Density		≥ 7.6g/cm3
Unit weight		4.4kg/L

What’s the application of steel cut wire:

Answer: Utilizing high quality alloy steel wire as the substrate, and the cut it into particles.Usually the length of the particles equal to its diameter. It is widely used in the process of surface cleaning and strengthening of profiles and workpieces in machinery, automobiles, shipbuilding, steel structures, pipelines and other manufacturing industries.

What is the working principle of carbon steel wire cut shot?

Answer: The carbon steel wire cut shot is projected to the surface of the workpiece to be cleaned at high speed in the form of a parabola with the high-speed operation of the shot blasting machine, so as to clean up the rust and oxide scale on the surface of the product to achieve a certain smoothness and roughness.

Application advantages:

1.Maintaining higher fatigue life under high strength, lower the consumption costs.
2.Good grain roundness, uniform size, no broken during using, higher shot peening quality.
3.Most cost-effective when used for shot peening of medchnical parts.

High quality raw material

Steel wire cutter

1 ton bulk bag packing

Wooden pallet packing