• new-banner

The importance of shot blasting machine maintenance

Any equipment will be consumed as long as it is used. For example, the shot blasting machine, the maintenance is very important. Otherwise the life of the shot blasting machine will be greatly shortened,and the times to treat with workpiece increased. Thus to have a good maintenance would be increase the shot blasting machine life and work efficiency.
2
Monthly maintenance and repair of shot blasting machine

 

Check whether the bolts at the connection of each component are fixed.
Check whether the rotating parts operate normally and lubricate them in time.
Check whether the fan duct is worn and fixed
 
Daily maintenance of shot blasting machine:

Check whether the bolts on the shot blasting machine and motor are loose, whether the wear-resistant parts are worn, and whether each access door is closed.
Check whether there is air leakage in the dust removal pipeline, whether the filter bag is dusty or broken, whether there are sundries on the filter screen in the separator, whether the electric shot supply gate valve is closed, and check the wear of the guard plate in the shot blasting room.
Check whether the limit switches are normal, whether the signal light on the console is normal, and clean the dust on the electrical control box.
 
Quarterly maintenance of shot blasting machine:

1. Check the integrity of the bearing electric control box and add lubricating oil.
2. Check the wear of the guard of the blasting wheel.
3. Check the tightness of fixing bolts and flange connections of motor, sprocket, fan and vibration conveying.
4. Replace the bearing on the main bearing seat of shot blasting machine with new high-speed lubricating oil.

3
Safety.
The scattered sundries shall be cleaned in time and kept far away from the equipment to avoid unnecessary injury when the machine is working.
During equipment maintenance, cut off the power supply and mark it. Protective devices such as chain or transmission belt shall be installed after inspection. Safety measures shall be taken before the shot blasting machine is started every time. If there is an accident during preparation, press the emergency button to stop the work to avoid accidents.
4


Post time: Jan-26-2022