OEM Manufacturer 0.7mm Stainless Steel Cut Wire Shot - Steel Grit – TAA
OEM Manufacturer 0.7mm Stainless Steel Cut Wire Shot - Steel Grit – TAA Detail:
Available Hardness:
GP: HRC46-50
Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment.
GL: HRC56-60
Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.
GH: HRC63-65
High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment.
Production Strength:
TAA adopts Arc Furnace Smelting and Double Quenching technology, which guarantee its metal abrasives’ chemical composition and high strength, high tenacity, long service life.
Tech Data: Steel Grit
|
Chemical Composition% |
C |
0.85-1.2 |
|
Si |
0.40-1.2 |
|
|
Mn |
0.60-1.2 |
|
|
S |
≤0.050 |
|
|
P |
≤0.050 |
|
|
Hardness |
GP |
HRC 46-50 |
|
GL |
HRC 53-60 |
|
|
GH |
HRC 63-65 |
|
|
Density |
≥7.4 g/cm3 |
|
|
microstructure |
Homogeneous tempered martensite or Troostite |
|
|
Appearance |
Angular |
|
Size distribution
|
Screen No. |
In |
Screen Size |
SAE J444 |
|||||||||
|
G10 |
G12 |
G14 |
G16 |
G18 |
G25 |
G40 |
G50 |
G80 |
G120 |
|||
|
6 |
0.132 |
3.35 |
|
|
|
|
|
|
|
|
|
|
|
7 |
0.111 |
2.80 |
All Pass |
|
|
|
|
|
|
|
|
|
|
8 |
0.0937 |
2.36 |
|
All Pass |
|
|
|
|
|
|
|
|
|
10 |
0.0787 |
2.00 |
≥80% |
|
All Pass |
|
|
|
|
|
|
|
|
12 |
0.0661 |
1.70 |
≥90% |
≥80% |
|
All Pass |
|
|
|
|
|
|
|
14 |
0.0555 |
1.40 |
|
≥90% |
≥80% |
|
All Pass |
|
|
|
|
|
|
16 |
0.0469 |
1.18 |
|
|
≥90% |
≥75% |
|
All Pass |
|
|
|
|
|
18 |
0.0394 |
1.00 |
|
|
|
≥85% |
≥75% |
|
All |
|
|
|
|
20 |
0.0331 |
0.850 |
|
|
|
|
|
|
|
|
|
|
|
25 |
0.0280 |
0.710 |
|
|
|
|
≥85% |
≥70% |
|
All Pass |
|
|
|
30 |
0.0232 |
0.600 |
|
|
|
|
|
|
|
|
|
|
|
35 |
0.0197 |
0.500 |
|
|
|
|
|
|
|
|
|
|
|
40 |
0.0165 |
0.425 |
|
|
|
|
|
≥80% |
≥70% |
|
All Pass |
|
|
45 |
0.0138 |
0.355 |
|
|
|
|
|
|
|
|
|
|
|
50 |
0.0117 |
0.300 |
|
|
|
|
|
|
≥80% |
≥65% |
|
All Pass |
|
80 |
0.007 |
0.180 |
|
|
|
|
|
|
|
≥75% |
≥65% |
|
|
120 |
0.0049 |
0.125 |
|
|
|
|
|
|
|
|
≥75% |
≥60% |
|
200 |
0.0029 |
0.075 |
|
|
|
|
|
|
|
|
|
≥75% |
Application
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.
Product detail pictures:
Related Product Guide:
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" as well as the theory of "quality the basic, believe in the 1st and management the advanced" for OEM Manufacturer 0.7mm Stainless Steel Cut Wire Shot - Steel Grit – TAA , The product will supply to all over the world, such as: Moscow, Irish, Panama, With the effort to keep pace with world's trend, we'll always endeavor to meet customers' demands. If you want develop any other new items, we can customize them to suit your needs. If you feel interest in any of our products and solutions or want develop new merchandise, you should feel free to contact us. We are looking forward to forming successful business relationship with customers all over the world.
By Arthur from Guatemala - 2017.08.15 12:36
Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!
By Joa from Slovenia - 2017.07.07 13:00
Related products
-
Lowest Price for Abrasive Cutting Disc - Grind...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
China Gold Supplier for Face Grinding Wheel - ...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Hot-selling Stainless Steel Grit G18 - Sponge ...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
-
Big discounting Pneumatic Grinding Wheel - Cut...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
High definition Diamond Blade For Cutting Steel...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Factory Promotional Gp120 Bearing Steel Grit -...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...
