OEM/ODM Manufacturer 0.4mm Stainless Steel Cut Wire Shot - Stainless steel grit – TAA
OEM/ODM Manufacturer 0.4mm Stainless Steel Cut Wire Shot - Stainless steel grit – TAA Detail:
Features
* Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc.
* Low dust emissions,improving operating environment, environmental friendly.
* Can replace part of the pickling process.
* Low dust emission and excellent operating environment, reducing the treatment of pickling waste.
* Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum.
* Can Be Used for Different Machines: blast rooms and blast cabinets as well as in centrifugal wheel blast machines.
* Blasting systems:Both Pressure blast system, Airless blast-cleaning equipment workable.
Technical specification
Hardness: >HRC57
Density: ＞ 7.0g/cm3
|
Screen |
In |
mm |
SG18 |
SG25 |
SG40 |
SG50 |
SG80 |
|
14# |
0.0555 |
1.40 |
All pass |
|
|
|
|
|
16# |
0.0469 |
1.18 |
|
All pass |
|
|
|
|
18# |
0.0394 |
1.00 |
≥75% |
|
All pass |
|
|
|
20# |
0.0331 |
0.85 |
|
|
|
|
|
|
25# |
0.0280 |
0.71 |
≥85% |
≥70% |
|
All pass |
|
|
30# |
0.0232 |
0.60 |
|
|
|
|
|
|
35# |
0.0197 |
0.500 |
|
|
|
|
|
|
40# |
0.0165 |
0.425 |
|
≥80% |
≥70% |
|
All pass |
|
45# |
0.0138 |
0.355 |
|
|
|
|
|
|
50# |
0.0117 |
0.300 |
|
|
≥80% |
≥65% |
|
|
80# |
0.0070 |
0.180 |
|
|
|
≥75% |
≥60% |
|
120# |
0.0049 |
0.125 |
|
|
|
|
≥70% |
Application
* Surface finishing of non-ferrous components
* Surface preparation prior to paint or coating
* Removal of ceramic from investment castings
* Descaling of non-ferrous heat treat parts
* Cleaning of welded joints
* Etching of plastic components prior to bonding
* Anchor profiling for paint and powder coat adhesion
Product detail pictures:
Related Product Guide:
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate inside our success for OEM/ODM Manufacturer 0.4mm Stainless Steel Cut Wire Shot - Stainless steel grit – TAA , The product will supply to all over the world, such as: Las Vegas, Atlanta, Tunisia, We have been in operation for more than 10 years. We are dedicated to quality products and consumer support. We currently own 27 product utility and design patents. We invite you to visit our company for a personalized tour and advanced business guidance.
By Rebecca from venezuela - 2018.10.09 19:07
Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
By Dale from Zimbabwe - 2018.06.03 10:17
Related products
-
Free sample for Glass Bead Vapor Blasting - Ga...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...
-
Factory Cheap Hot Gl18 Steel Grit - Garnet ...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not a...
-
High Quality Alloy Steel Shot - Aluminum cut w...
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Microhar...
-
2018 China New Design Steel Shot Ballast - Gar...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not a...
-
Well-designed Brown Fused Alumina Uk - Garnet ...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...
-
2018 New Style Sponge Media Abrasives 220# - L...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duple...
