OEM/ODM Manufacturer Copper Cut Wire Shot For Blasting - Zinc cut wire – TAA
OEM/ODM Manufacturer Copper Cut Wire Shot For Blasting - Zinc cut wire – TAA Detail:
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot.
These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives.
Features
1. Bright colour and lustre
2. Compact structure
3. Little impurity and high purity
4. No premature breakdown or flaking
5. Less dust than either steel or aluminum abrasives
6. Durability: 6500 times
Technological Index
|
Product Description |
Zinc Cut Wire Shot |
|
Chemical Composition |
Zn≥99.9% |
|
Microhardness |
35~45HV |
|
Tensile Intensity |
90~120Mpa |
|
Durability |
6500 Times |
|
Microstructure |
Deformed α |
|
Density |
7.1 g/cm3 |
|
Bulk Density |
4.1g/cm3 |
|
Hardness |
As cut:38-55HV Conditioned:45-60HV |
Available sizes
1. Zinc cut wire: 1.5mm 1.8mm 2.0mm 2.5mm 3.0mm
2. Zinc Shot: 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm
Shapes: As cut(cylindrical), conditioned(rounded)
Application
It is used for removing oxidation skin, burr, eliminating surface defect, removing stress, etching, strengthen, prevention rust before painting of metal die-casting, precision casting, hardware tool, machinery manufacturing, automobile spare parts, apparatus and pump valves.
Product detail pictures:
Related Product Guide:
We emphasize development and introduce new products into the market every year for OEM/ODM Manufacturer Copper Cut Wire Shot For Blasting - Zinc cut wire – TAA , The product will supply to all over the world, such as: USA, Moscow, Bahrain, In the future, we promise to keep offer the high quality and more cost-effective products, the more efficient after sales service to our all customers all over the world for the common development and the higher benefit.
By Michaelia from Bulgaria - 2017.04.18 16:45
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Mary from Ottawa - 2017.09.30 16:36
Related products
-
Factory directly Sponge-Jet Blasting Media - B...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...
-
2018 China New Design Steel Shot Ballast - Gar...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not a...
-
Hot sale Factory Different Grinding Wheels - C...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
2018 New Style Grinding Wheel Types - Grinding...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Cheapest Price Brown Fused Alumina For Hs Code ...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
Factory wholesale S330 Steel Shot - Low Carbon...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
