• product-bg
  • product-bg

Original Factory White Fused Aluminum Oxide Uses - Copper cut wire – TAA

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

As for competitive selling prices, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we are the lowest around for 0.6mm Aluminum Cut Wire, Alloy Steel Grit, 430 Stainless Steel Cut Wire Shot 0.8mm, Never-ending improvement and striving for 0% deficiency are our two main quality policies. Should you need anything, don't hesitate to contact us.
Original Factory White Fused Aluminum Oxide Uses - Copper cut wire – TAA Detail:

Tech Data

Product Description

Copper Cut Wire Shot

Chemical Composition

Cu: 58-99%, the rest is Zn

Microhardness

110~300HV

Tensile Intensity

200~500Mpa

Durability

5000 Times

Microstructure

Deformed αorα+β

Density

8.9 g/cm3

Bulk Density

5.1 g/cm3

Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc.

Advantage

1. Long life time
2. Less Dust
3. Specific gravity higher than other blasting beads
4. Lower hardness than steel shot &glass beads
5. Shape: Cylindrical/rounded

Application

1.  for new and old steel outdoor surface cleaning, descaling, strengthen.
2. as a wear-resistant flooring aggregate, hard floor tiles can be made for the square, garages and other non-slip floor.
3. for counterweight sand, such as cement plants.
4. through after fine processing, suitable for all kinds of denim spray and spray more sophisticated use.
5. the abrasive material (sand, hard abrasive paper, sandpaper, emery cloth).

It is widely used in surface treatment such as descaling, burr removing, elimination of surface defects, internal stress relief, etching, matte, leveling, strengthening and rust prevention before applying in the metal die castings, precision castings, hardware & tools, machinery manufacturing, auto parts, instruments & meters, pumps and valves industries.


Product detail pictures:

Original Factory White Fused Aluminum Oxide Uses - Copper cut wire – TAA detail pictures

Original Factory White Fused Aluminum Oxide Uses - Copper cut wire – TAA detail pictures

Original Factory White Fused Aluminum Oxide Uses - Copper cut wire – TAA detail pictures

Original Factory White Fused Aluminum Oxide Uses - Copper cut wire – TAA detail pictures


Related Product Guide:

abide by the contract", conforms into the market requirement, joins in the market competition by its good quality also as provides a lot more comprehensive and great company for purchasers to let them turn into huge winner. The pursue from the firm, would be the clients' gratification for Original Factory White Fused Aluminum Oxide Uses - Copper cut wire – TAA , The product will supply to all over the world, such as: Slovak Republic, Comoros, British, We welcome customers from all over the world come to discuss business. We supply high quality products, reasonable prices and good services. We hope to sincerely build business relationships with customers from at home and abroad, jointly striving for a resplendent tomorrow.
  • We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
    5 Stars By Rebecca from Mauritius - 2018.05.13 17:00
    Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.
    5 Stars By Adela from Bangladesh - 2017.01.28 19:59
    Write your message here and send it to us

    Related products

    • Free sample for Stainless Steel Cut Wire Shot 0.7mm - Bearing steel grit – TAA

      Free sample for Stainless Steel Cut Wire Shot 0...

      Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...

    • Hot New Products Steel Grit Gl120 - Aluminum cut wire – TAA

      Hot New Products Steel Grit Gl120 - Aluminum c...

      Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Microhar...

    • Top Quality Aluminum Cut Wire Shot Suppliers - Steel Shot – TAA

      Top Quality Aluminum Cut Wire Shot Suppliers -...

      Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50  Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35                       All pass 7 0.111 2.80                     All pass   8 0.0937 2.36                   All...

    • Low price for Media Blasting Glass Bead - Stainless steel grit – TAA

      Low price for Media Blasting Glass Bead - Stai...

      Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * ...

    • High reputation S460 Steel Shot - Garnet – TAA

      High reputation S460 Steel Shot - Garnet ̵...

      Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...

    • factory Outlets for Bearing Steel Grit G18 - Sponge media abrasives – TAA

      factory Outlets for Bearing Steel Grit G18 - S...

      Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...