Professional China Metal Grinding Disc - Grinding wheels FW-09 series – TAA
Professional China Metal Grinding Disc - Grinding wheels FW-09 series – TAA Detail:
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diamond tools.
Advantages
Safty and environment friendly
Fast cutting and grinding,no break off,no pollution
· High efficiency
Improving efficiency of 30%-50% than traditional cutting disk
| Number | Picture | Specification | Safety Rotary Speed（r/min） | Application | Performance comparisons |
| FW100-09 |  |
100×16 | 12000 | Large aread grinding of iron casting (ductile cast iron, Gray Cast iron) | 1. Grinding iron casting surface, TAA is over 70 times than resin disk, efficiency increased by 100% 2. Grinding steel structure weld area, TAA is 40 times than resin disk, efficiency increased by 100%. 3. Grinding fiber glass, TAA is 40 times than resin disk, efficiency increased by 100%. 4. Grinding marble and ceramic, TAA is 3 times than sintered cutter disk , efficiency increased by 100%. |
| FW125-09 | 125×22.23 | 10000 | |||
| FW150-09 | 150×22.23 | 9500 | |||
| FW180-09 | 180×22.23 | 8500 |
· Long service life
Using brazing technology,diamond on the surface not falling down
TAA diamond Grinding wheel
Product detail pictures:
Related Product Guide:
Innovation, excellent and reliability are the core values of our firm. These principles today more than ever form the basis of our success as an internationally active mid-size corporation for Professional China Metal Grinding Disc - Grinding wheels FW-09 series – TAA , The product will supply to all over the world, such as: Madagascar, Belgium, kazan, Our staffs are rich in experience and trained strictly, with qualified knowledge, with energy and always respect their customers as the No. 1, and promise to do their best to deliver the effective and individual service for customers. The Company pays attention to maintaining and developing the long-term cooperation relationship with the customers. We promise, as your ideal partner, we'll develop a bright future and enjoy the satisfying fruit together with you, with persisting zeal, endless energy and forward spirit.
By Phyllis from Bahamas - 2018.02.21 12:14
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
By Debby from Mombasa - 2017.09.30 16:36
Related products
-
Factory wholesale Glass Bead Blasting Cast Iron...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
OEM Customized Angular Steel Grit - Bearing st...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...
-
OEM Manufacturer 0.7mm Stainless Steel Cut Wire...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
-
Original Factory 0.3mm Zinc Cut Wire - Steel G...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
Hot Sale for Medium Glass Bead Blasting Abrasiv...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
-
Cheap price Cutting Disc And Grinding Disc - G...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
