• product-bg
  • product-bg

Professional Design Sponge Jet Silver Sponge Media - Garnet – TAA

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our commission is always to provide our customers and clientele with best quality and aggressive portable digital products for Gh80 Steel Grit, Stainless Steel Beads For Blasting, 430 Stainless Steel Cut Wire Shot 0.8mm, As an expert specialized within this field, we've been committed to solving any problem of high temperature protection for users.
Professional Design Sponge Jet Silver Sponge Media - Garnet – TAA Detail:

Features

■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area.
■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not adversely dimples and pits, easy access to 50-70 microns surface roughness.
■ Recyclable—Its excellent tenacity and lower brittleness can lower damage rates and higher productivity. Depending on the specific application, it can be reused up to 3 times.
■ Lower Production Costs—The paint’s adhesion and corrosion resistance depends on the cleanliness and surface roughness of base material. Using garnet abrasive can greatly saving the amount of paint by completely eliminate adverse spur and pits.
■ Improve Health and Safety—It’s non-toxic characteristics can greatly reducing silicosis, leaching of metals or radioactive contamination risks.

Technical specification

Item

Content

Physical Properties

Chemical compositions %

SiO2

34-40%

Mohs Hardness

Mohs 7.5-8.0

Fe2O3+FeO

25-31%

Specific Gravity

3.7-4.2g/cm3

Al2O3

15-21%

Bulk Density

1.8-1.9g/cm3

MgO

5-6%

Chloride Content

10-15ppm(25ppm max)

CaO

5-10%

Color

Red/Pink/brown

MnO

0-1.0%

Acid Solubility

<1%

TiO2

0.25%

Grain Shape

Sub Angular

Commonly used sizes
20/40mesh, 30/60mesh, 80mesh, 70/100mesh etc.

Applications

Blasting abrasives: Derusting of steel structure, hull, bridges
Water jet cutting: Cutting metal, stone, glass
Grinding media: Grinding marble, optical lens, glass, leather and other materials
Filter medium of chemical, petroleum, pharmacy, water treatment
Coated abrasives of grinding wheel, emery cloth, sandpaper
Wear-resistant material: Used in highway pavement, airport runway, prevent slippery, wear-resisting rubber paint


Product detail pictures:

Professional Design Sponge Jet Silver Sponge Media - Garnet – TAA detail pictures

Professional Design Sponge Jet Silver Sponge Media - Garnet – TAA detail pictures


Related Product Guide:

All we do is often involved with our tenet " Purchaser to start with, Rely on initially, devoting over the food stuff packaging and environmental defense for Professional Design Sponge Jet Silver Sponge Media - Garnet – TAA , The product will supply to all over the world, such as: United States, Spain, Canada, We taking advantage of experience workmanship, scientific administration and advanced equipment, ensure the product quality of production, we not only win the customers' faith, but also build up our brand. Today, our team is committed to innovation, and enlightenment and fusion with constant practice and outstanding wisdom and philosophy, we cater to the market demand for high-end products, to do professional products.
  • Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
    5 Stars By Sabina from Algeria - 2018.09.23 17:37
    Good quality, reasonable prices, rich variety and perfect after-sales service, it's nice!
    5 Stars By Anastasia from Netherlands - 2018.10.31 10:02
    Write your message here and send it to us

    Related products

    • Newly Arrival Cut Off Wheel For Aluminum - Cutting disc FS-05 series – TAA

      Newly Arrival Cut Off Wheel For Aluminum - Cut...

      Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...

    • Reasonable price Gh80 Bearing Steel Grit - Zinc cut wire – TAA

      Reasonable price Gh80 Bearing Steel Grit - Zin...

      Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and ...

    • 100% Original Factory Stainless Steel Shot For Tumbler - Sponge media abrasives – TAA

      100% Original Factory Stainless Steel Shot For ...

      Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...

    • China wholesale Gl16 Bearing Steel Grit - Aluminum cut wire – TAA

      China wholesale Gl16 Bearing Steel Grit - Alum...

      Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Microhar...

    • OEM Supply Steel Cut Wire Shot - Glass beads – TAA

      OEM Supply Steel Cut Wire Shot - Glass beads &...

      Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specification Chemica...

    • Hot-selling 20/40 Mesh Garnet - Steel Shot – TAA

      Hot-selling 20/40 Mesh Garnet - Steel Shot ...

      Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50  Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35                       All pass 7 0.111 2.80                     All pass   8 0.0937 2.36                   All...