Short Lead Time for Overhead Rail Shot-Blast Machines - Continuous Overhead Rail Shot Blast Machines – TAA
Short Lead Time for Overhead Rail Shot-Blast Machines - Continuous Overhead Rail Shot Blast Machines – TAA Detail:
Advantages of Track-passing shot blasting machine
* Reliable blasting technology: Our high performance turbine units are very reliable.
They are highly effficient due to the low number of wearing parts, maintenance-friendly design and high abrasive flow rate.
* Low maintenance: Regular maintenance helps maintain the value of the machines. Large maintenance doors provide easy access to all essential components and facilitate the rapid replacement of wearing parts.
* Innovative filter technology: The innovative filter technology has a convincing and powerful performance.
The special characteristics include the conical filter cartridges which can be replaced quickly and easily via drawer elements outside the casing. These cartridge fi lter systems can also be retrofi tted to older shot blast machines of most makes
* Robust construction: The sturdy construction uses special wear resistant steel with additional linings in areas subject to high wear. All helping to protect the owner’s investment.
There are many versions, types and sizes of catenary shot blasting machines. Their floor space is relatively small.
Because the catenary shot blasting machine is easy to integrate into the logistics system of the factory, it is widely used.
AGTOS Track-passing shot blasting machine are available in different sizes, including the following standard sizes:
| Technical Specifications |
HT 11-13-2-11 | HT 13-17-2-11 | HT 13-21-3-11 | HT 17-17-2-11 | HT 17-23-3-11 | HT 17-27-4-11 | HT 21-23-3-11 | HT 21-23-3-15 |
| Max. hook load (kg) | 400 | 400 | 400 | 800 | 800 | 800 | 800 | 800 |
| Alternative max. hook load (kg) |
800 | 800 | 800 | 1600 | 1600 | 1600 | 1600 | 1600 |
| Work piece diameter (mm) |
1100 | 1300 | 1300 | 1700 | 1700 | 1700 | 2100 | 2100 |
| Height of blasting zone (mm) |
1300 | 1700 | 2100 | 1700 | 2300 | 2700 | 2300 | 2300 |
| Turbine output (kW) | 2×11 | 2×11 | 3×11 | 2×11 | 3×11 | 4×11 | 3×11 | 3×15 |
| Cartridge filter | PF4-09 | PF4-12 | PF4-12 | PF4-12 | PF4-12 | PF4-20 | PF4-20P | PF4-28 |
| Suction output (m5/h) | 2600 | 4500 | 4500 | 4500 | 4500 | 7500 | 7500 | 10000 |
| Residual dust content with secondary filter (mg/m1) |
1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
Product detail pictures:
Related Product Guide:
Our improvement depends on the superior equipment, excellent talents and continuously strengthened technology forces for Short Lead Time for Overhead Rail Shot-Blast Machines - Continuous Overhead Rail Shot Blast Machines – TAA , The product will supply to all over the world, such as: Ghana, Panama, Mexico, We integrate all our advantages to continuously innovate, improve and optimize our industrial structure and product performance. We will always believe in and work on it. Welcome to join us to promote green light, together we will make a better Future!
By Jean Ascher from Moldova - 2017.08.15 12:36
The customer service reprersentative explained very detailed, service attitude is very good, reply is very timely and comprehensive, a happy communication! We hope to have a opportunity to cooperate.
By Meroy from Madras - 2018.11.02 11:11
Related products
-
Manufacturing Companies for Blasting With Glass...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type It...
-
2018 High quality Steel Shots And Grits - Stee...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
-
PriceList for 150mm Cutting Disc - Cutting dis...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Factory Outlets Cutting Disc In Face - Cutting...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Super Purchasing for 25kg Brown Fused Alumina -...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and ...
-
OEM Factory for Diamond Saw Blade - Grinding w...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
