2018 High quality Zinc Shot Blasting - Carbon steel cut wire shot – TAA
2018 High quality Zinc Shot Blasting - Carbon steel cut wire shot – TAA Detail:
We made great improvement in material and the techniques on the basis of the traditional production process.
Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable.
Improving the wiredrawing craft which make the internal organization more dense.
Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life.
|
Item |
Technical index |
|
|
Chemical Composition% |
C |
0.45-0.85% |
|
Si |
0.15-0.55% |
|
|
Mn |
0.30-1.30% |
|
|
S |
≤0.05% |
|
|
P |
≤0.04% |
|
|
Alloy elements |
appropriate amount |
|
|
Hardness |
HRC38-50/50-55/55-60/58-63/60-65 |
|
|
Microstructure |
Deformation pearlite |
|
|
Density |
≥ 7.6g/cm3 |
|
|
Unit weight |
4.4kg/L |
|
Main sizes we can supply: 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 1.0mm.
Application
Product detail pictures:
Related Product Guide:
We're going to commit ourselves to giving our esteemed buyers using the most enthusiastically considerate solutions for 2018 High quality Zinc Shot Blasting - Carbon steel cut wire shot – TAA , The product will supply to all over the world, such as: Argentina, Seychelles, Puerto Rico, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and solutions and good service for domestic and international customers.
By Erin from Grenada - 2018.06.05 13:10
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Elsa from Seychelles - 2018.10.09 19:07
Related products
-
Cheap price Garnet 20/40 Mesh - Brown Fused Al...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...
-
Competitive Price for Brown Fused Alumina 80# -...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not a...
-
OEM Supply 400mm Cutting Disc - Grinding wheel...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Hot sale Gh50 Bearing Steel Grit - Steel Grit ...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
OEM/ODM Manufacturer Copper Cut Wire Shot For B...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...
-
Fixed Competitive Price S230 Low Carbon Steel S...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
