8 Year Exporter Stainless Steel Cut Wire Shot 1.0mm - Stainless steel grit – TAA
8 Year Exporter Stainless Steel Cut Wire Shot 1.0mm - Stainless steel grit – TAA Detail:
Features
* Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc.
* Low dust emissions,improving operating environment, environmental friendly.
* Can replace part of the pickling process.
* Low dust emission and excellent operating environment, reducing the treatment of pickling waste.
* Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum.
* Can Be Used for Different Machines: blast rooms and blast cabinets as well as in centrifugal wheel blast machines.
* Blasting systems:Both Pressure blast system, Airless blast-cleaning equipment workable.
Technical specification
Hardness: >HRC57
Density: > 7.0g/cm3
Screen |
In |
mm |
SG18 |
SG25 |
SG40 |
SG50 |
SG80 |
14# |
0.0555 |
1.40 |
All pass |
||||
16# |
0.0469 |
1.18 |
All pass |
||||
18# |
0.0394 |
1.00 |
≥75% |
All pass |
|||
20# |
0.0331 |
0.85 |
|||||
25# |
0.0280 |
0.71 |
≥85% |
≥70% |
All pass |
||
30# |
0.0232 |
0.60 |
|||||
35# |
0.0197 |
0.500 |
|||||
40# |
0.0165 |
0.425 |
≥80% |
≥70% |
All pass |
||
45# |
0.0138 |
0.355 |
|||||
50# |
0.0117 |
0.300 |
≥80% |
≥65% |
|||
80# |
0.0070 |
0.180 |
≥75% |
≥60% |
|||
120# |
0.0049 |
0.125 |
≥70% |
Application
* Surface finishing of non-ferrous components
* Surface preparation prior to paint or coating
* Removal of ceramic from investment castings
* Descaling of non-ferrous heat treat parts
* Cleaning of welded joints
* Etching of plastic components prior to bonding
* Anchor profiling for paint and powder coat adhesion
Product detail pictures:
Related Product Guide:
As for aggressive costs, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such high-quality at such rates we have been the lowest around for 8 Year Exporter Stainless Steel Cut Wire Shot 1.0mm - Stainless steel grit – TAA , The product will supply to all over the world, such as: Malaysia, Lithuania, Slovenia, Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We've got tightened inspection for quality of product.
By Olivia from South Africa - 2017.06.19 13:51
We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
By Nana from Cairo - 2017.10.25 15:53