Best Price on Glass Bead Abrasive Msds - Bearing steel grit – TAA
Best Price on Glass Bead Abrasive Msds - Bearing steel grit – TAA Detail:
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features:
Raw Material
Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium.
Technology
Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects.
Low wear
The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with ball surfaces.
Technical specification
|
Chemical Composition% |
C |
0.80-1.20 |
|
|
Si |
0.15-1.20 |
||
|
Mn |
0.30-1.20 |
||
|
Cr |
0.60-1.65 |
||
|
S |
<0.050 |
||
|
P |
<0.050 |
||
|
Hardness |
GP:46-50HRC |
GH:>60HRC |
|
|
GL:56-60HRC |
|||
|
GH:>60HRC |
|||
|
Application |
Sand blasting |
Stone cutting |
|
|
Microstructure |
Homogeneous tempered martensite |
||
|
Density |
≥7.5g/cm3 |
||
|
Appearance |
Angular |
||
Application
Sanding blasting for body section, container box body, wild electricity equipment, locomotives, steel structure, port machinery etc.
Stone cutting/granite cutting in gang saw machine
Product detail pictures:
Related Product Guide:
To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for Best Price on Glass Bead Abrasive Msds - Bearing steel grit – TAA , The product will supply to all over the world, such as: Egypt, Czech Republic, Islamabad, We welcome customers from all over the world come to discuss business. We supply high quality solutions, reasonable prices and good services. We hope to sincerely build business relationships with customers from at home and abroad, jointly striving for a resplendent tomorrow.
By Flora from India - 2018.09.12 17:18
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Renata from Slovenia - 2017.07.07 13:00
Related products
-
Factory Supply Stainless Steel Grit G25 - Alum...
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Microhar...
-
Cheapest Price Metal Surface Treatment Cast Ste...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
-
Quality Inspection for Cut Wire Shots Made Of A...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
Factory supplied Grinding Wheel Company - Cutt...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Best Price for G40 Sponge Media Abrasives - Sp...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
-
Top Quality S660 Low Carbon Steel Shot - Zinc ...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and ...
