Cheap price 7inch Grinding Wheel - Grinding wheels FW-07 series – TAA
Cheap price 7inch Grinding Wheel - Grinding wheels FW-07 series – TAA Detail:
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diamond tools
Advantages
Safty and environment friendly
Fast cutting and grinding, no break off, no pollution
· High efficiency
|
Number |
Picture |
Specification |
Safety Rotary Speed(r/min) |
Application |
Performance comparisons |
|
FW100-07 |
|
100×2.5×16 |
12000 |
Flat grinding and deburring of iron casting(ductile cast iron, Gray Cast iron) |
1. Grinding iron casting surface, TAA is over 70 times than resin disk, efficiency increased by 100% 2. Grinding steel structure weld area, TAA is 40 times than resin disk, efficiency increased by 100%. 3. Grinding fiber glass, TAA is 40 times than resin disk, efficiency increased by 100%. 4. Grinding marble and ceramic, TAA is 3 times than sintered cutter disk , efficiency increas
|
|
FW125-07 |
125×2.5×22.23 |
10000 |
|||
|
FW150-07 |
150×3.0×22.23 |
9500 |
|||
|
FW180-07 |
180×3.0×22.23 |
8500 |
|||
|
FW100-09 |
|
100×2.5×16 |
12000 |
Large aread grinding of iron casting (ductile cast iron, Gray Cast iron) |
|
|
FW125-09 |
125×2.5×22.23 |
10000 |
|||
|
FW150-09 |
150×3.0×22.23 |
9500 |
|||
|
FW180-09 |
180×3.0×22.23 |
8500 |
Improving efficiency of 30%-50% than traditional cutting disk
·Long service life
Using brazing technology,diamond on the surface not falling down
TAA diamond Grinding wheel
Product detail pictures:
Related Product Guide:
We offer wonderful energy in high-quality and improvement,merchandising,product sales and marketing and advertising and procedure for Cheap price 7inch Grinding Wheel - Grinding wheels FW-07 series – TAA , The product will supply to all over the world, such as: UK, Sacramento, New York, Adhering to the principle of "Enterprising and Truth-Seeking, Preciseness and Unity", with technology as the core, our company continues to innovate, dedicated to providing you with the highest cost-effective solutions and meticulous after-sales service. We firmly believe that: we're outstanding as we have been specialized.
By Penelope from Jersey - 2017.06.16 18:23
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Daphne from Czech republic - 2017.02.14 13:19
Related products
-
Cheap PriceList for Grinding Wheel 180mm - Cut...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
High Quality 4.5 Metal Cutting Diamond Blade -...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
18 Years Factory S550 Low Carbon Steel Shot - ...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
Trending Products 430 0.8mm Stainless Steel Cut...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specification Chemica...
-
Wholesale Vacuum Blasting Machine - Blast whee...
TAA high performance blast wheel have proven themselves on the market to be robust, economically efficient and maintenance-friendly. They are available with different turbine wheel diameters and a variety of spare and wear materials (e. g. hard metal). TAA high performance blast wheels are very popular for modernizing conventional shot-blasting machines as well. Product Features Improving shot blasting speed obviously Good wear resistance Reducing energy consumption greatly Extraordinary serv...
-
factory low price Garnet Abrasive - Sponge med...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
