China Cheap price Steel Shot Blasting - Stainless steel grit – TAA
China Cheap price Steel Shot Blasting - Stainless steel grit – TAA Detail:
Features
* Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc.
* Low dust emissions,improving operating environment, environmental friendly.
* Can replace part of the pickling process.
* Low dust emission and excellent operating environment, reducing the treatment of pickling waste.
* Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum.
* Can Be Used for Different Machines: blast rooms and blast cabinets as well as in centrifugal wheel blast machines.
* Blasting systems:Both Pressure blast system, Airless blast-cleaning equipment workable.
Technical specification
Hardness: >HRC57
Density: ＞ 7.0g/cm3
|
Screen |
In |
mm |
SG18 |
SG25 |
SG40 |
SG50 |
SG80 |
|
14# |
0.0555 |
1.40 |
All pass |
||||
|
16# |
0.0469 |
1.18 |
All pass |
||||
|
18# |
0.0394 |
1.00 |
≥75% |
All pass |
|||
|
20# |
0.0331 |
0.85 |
|||||
|
25# |
0.0280 |
0.71 |
≥85% |
≥70% |
All pass |
||
|
30# |
0.0232 |
0.60 |
|||||
|
35# |
0.0197 |
0.500 |
|||||
|
40# |
0.0165 |
0.425 |
≥80% |
≥70% |
All pass |
||
|
45# |
0.0138 |
0.355 |
|||||
|
50# |
0.0117 |
0.300 |
≥80% |
≥65% |
|||
|
80# |
0.0070 |
0.180 |
≥75% |
≥60% |
|||
|
120# |
0.0049 |
0.125 |
≥70% |
Application
* Surface finishing of non-ferrous components
* Surface preparation prior to paint or coating
* Removal of ceramic from investment castings
* Descaling of non-ferrous heat treat parts
* Cleaning of welded joints
* Etching of plastic components prior to bonding
* Anchor profiling for paint and powder coat adhesion
Product detail pictures:
Related Product Guide:
We pursue the administration tenet of "Quality is superior, Services is supreme, Standing is first", and will sincerely create and share success with all customers for China Cheap price Steel Shot Blasting - Stainless steel grit – TAA , The product will supply to all over the world, such as: Paraguay, Orlando, Belgium, Besides there are also professional production and management , advanced production equipment to assure our quality and delivery time , our company pursues the principle of good faith, high-quality and high-efficiency. We guarantee that our company will try our best to reduce customer purchase cost, shorten the period of purchase, stable products quality, increase customers' satisfaction and achieve win-win situation .
By Laura from Kenya - 2017.09.26 12:12
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Wendy from Sydney - 2017.09.22 11:32
Related products
-
OEM Factory for Steel Shot Abrasive - Glass be...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specification Chemica...
-
Renewable Design for Sponge Media Abrasives G12...
Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...
-
professional factory for 1.2mm Zinc Cut Wire -...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
Factory Cheap Hot Tungsten Carbide Grinding Dis...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Chinese wholesale Bearing Steel Grit Gh16 - Co...
Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...
-
Bottom price Sand Blasting Copper Cut Wire Shot...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
