China Manufacturer for Brown Fused Alumina 120# - Bearing steel grit – TAA
China Manufacturer for Brown Fused Alumina 120# - Bearing steel grit – TAA Detail:
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features:
Raw Material
Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium.
Technology
Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects.
Low wear
The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with ball surfaces.
Technical specification
|
Chemical Composition% |
C |
0.80-1.20 |
|
|
Si |
0.15-1.20 |
||
|
Mn |
0.30-1.20 |
||
|
Cr |
0.60-1.65 |
||
|
S |
<0.050 |
||
|
P |
<0.050 |
||
|
Hardness |
GP:46-50HRC |
GH:>60HRC |
|
|
GL:56-60HRC |
|||
|
GH:>60HRC |
|||
|
Application |
Sand blasting |
Stone cutting |
|
|
Microstructure |
Homogeneous tempered martensite |
||
|
Density |
≥7.5g/cm3 |
||
|
Appearance |
Angular |
||
Application
Sanding blasting for body section, container box body, wild electricity equipment, locomotives, steel structure, port machinery etc.
Stone cutting/granite cutting in gang saw machine
Product detail pictures:
Related Product Guide:
The purchaser fulfillment is our primary focus on. We uphold a consistent level of professionalism, high quality, credibility and service for China Manufacturer for Brown Fused Alumina 120# - Bearing steel grit – TAA , The product will supply to all over the world, such as: French, Somalia, Russia, Ensuring high product quality by choosing the best suppliers, now we have also implemented complete quality control processes throughout our sourcing procedures. Meanwhile, our access to a large range of factories, coupled with our excellent management, also ensures that we can quickly fill your requirements at the best prices, regardless the order size.
By Jack from Florence - 2018.12.11 14:13
This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
By Christian from Ecuador - 2018.09.29 17:23
Related products
-
New Arrival China Diamond Cut Off Saw - Cuttin...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
100% Original Diamond Tile Cutting Wheel - Gri...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Factory Cheap Hot Grinding Wheel For Grinder -...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
New Arrival China Proper Grit To Blast Stainles...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...
-
Fast delivery G18 Stainless Steel Grit - Glass...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specification Chemica...
-
18 Years Factory Glass Bead Blasting Services -...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
