China OEM 0.5mm Carbon Steel Cut Wire - Zinc cut wire – TAA
China OEM 0.5mm Carbon Steel Cut Wire - Zinc cut wire – TAA Detail:
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot.
These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives.
Features
1. Bright colour and lustre
2. Compact structure
3. Little impurity and high purity
4. No premature breakdown or flaking
5. Less dust than either steel or aluminum abrasives
6. Durability: 6500 times
Technological Index
|
Product Description |
Zinc Cut Wire Shot |
|
Chemical Composition |
Zn≥99.9% |
|
Microhardness |
35~45HV |
|
Tensile Intensity |
90~120Mpa |
|
Durability |
6500 Times |
|
Microstructure |
Deformed α |
|
Density |
7.1 g/cm3 |
|
Bulk Density |
4.1g/cm3 |
|
Hardness |
As cut:38-55HV Conditioned:45-60HV |
Available sizes
1. Zinc cut wire: 1.5mm 1.8mm 2.0mm 2.5mm 3.0mm
2. Zinc Shot: 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm
Shapes: As cut(cylindrical), conditioned(rounded)
Application
It is used for removing oxidation skin, burr, eliminating surface defect, removing stress, etching, strengthen, prevention rust before painting of metal die-casting, precision casting, hardware tool, machinery manufacturing, automobile spare parts, apparatus and pump valves.
Product detail pictures:
Related Product Guide:
We have been commitment to supply the competitive price ,excellent products and solutions high-quality, at the same time as fast delivery for China OEM 0.5mm Carbon Steel Cut Wire - Zinc cut wire – TAA , The product will supply to all over the world, such as: Moldova, Chile, Jamaica, We have more than 10 years exported experience and our products have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!
By Geraldine from Miami - 2017.12.31 14:53
Products and services are very good, our leader is very satisfied with this procurement, it is better than we expected,
By Darlene from Rwanda - 2018.06.05 13:10
Related products
-
Factory Price For Cut Wire Shot Peening Media -...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
-
Best Price on Cutting Disc 14inch - Cutting di...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Leading Manufacturer for Aluminium Cut Wire Sho...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...
-
Chinese Professional Garnet Sandblast Media - ...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
-
Chinese Professional Garnet Sandblast Media - ...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...
-
Chinese Professional Bearing Steel Grit Gh18 -...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...
