China Supplier Cutting Wheel Disc - Grinding wheels FW-07 series – TAA
China Supplier Cutting Wheel Disc - Grinding wheels FW-07 series – TAA Detail:
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diamond tools
Advantages
Safty and environment friendly
Fast cutting and grinding, no break off, no pollution
· High efficiency
|
Number |
Picture |
Specification |
Safety Rotary Speed(r/min) |
Application |
Performance comparisons |
|
FW100-07 |
|
100×2.5×16 |
12000 |
Flat grinding and deburring of iron casting(ductile cast iron, Gray Cast iron) |
1. Grinding iron casting surface, TAA is over 70 times than resin disk, efficiency increased by 100% 2. Grinding steel structure weld area, TAA is 40 times than resin disk, efficiency increased by 100%. 3. Grinding fiber glass, TAA is 40 times than resin disk, efficiency increased by 100%. 4. Grinding marble and ceramic, TAA is 3 times than sintered cutter disk , efficiency increas
|
|
FW125-07 |
125×2.5×22.23 |
10000 |
|||
|
FW150-07 |
150×3.0×22.23 |
9500 |
|||
|
FW180-07 |
180×3.0×22.23 |
8500 |
|||
|
FW100-09 |
|
100×2.5×16 |
12000 |
Large aread grinding of iron casting (ductile cast iron, Gray Cast iron) |
|
|
FW125-09 |
125×2.5×22.23 |
10000 |
|||
|
FW150-09 |
150×3.0×22.23 |
9500 |
|||
|
FW180-09 |
180×3.0×22.23 |
8500 |
Improving efficiency of 30%-50% than traditional cutting disk
·Long service life
Using brazing technology,diamond on the surface not falling down
TAA diamond Grinding wheel
Product detail pictures:
Related Product Guide:
In an effort to finest meet up with client's requirements, all of our operations are strictly performed in line with our motto "High High quality, Competitive Rate, Fast Service" for China Supplier Cutting Wheel Disc - Grinding wheels FW-07 series – TAA , The product will supply to all over the world, such as: panama, Yemen, Russia, Our faith is to be honest first, so we just supply high quality products to our customers. Really hope that we can be business partners. We believe that we can establish long time business relationship with each other. You can contact us freely for more information and pricelist of our products !
By Lauren from Croatia - 2017.04.28 15:45
The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.
By Sandy from Russia - 2017.10.23 10:29
Related products
-
OEM manufacturer Gh120 Steel Grit - Stainless ...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
2018 China New Design Cast Stainless Steel Grit...
Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...
-
Manufacturer of Low Carbon Steel Shot Manufactu...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
-
Manufactur standard Angular Alloy Grit - Alumi...
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Microhar...
-
High reputation S460 Steel Shot - Garnet ̵...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...
-
factory customized Flush Cut Diamond Blade - G...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
