Chinese wholesale Glass Beads 120# - Aluminum cut wire – TAA
Chinese wholesale Glass Beads 120# - Aluminum cut wire – TAA Detail:
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine.
Tech Data
|
Products |
Aluminium Cut Wire Shot |
|
Chemical Composition |
Al≥99% |
|
Microhardness |
45~50HV |
|
Tensile Intensity |
80~240Mpa |
|
Durability |
6500 Times |
|
Microstructure |
Deformed α |
|
Density |
2.7g/cm3 |
|
Bulk Density |
1.5g/cm3 |
|
Appearance |
cylindrical |
Available sizes: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm
Advantages
■ Most economical and lowest consumption
■ Consumption 3-4 times less compare to cast shot
■ No dust formation
■ Faster cleaning
■ Environmental friendly
■ Uniform hardness
■ Stabilized grain size
■ Increased fatigue life of blasted part
Appearance: As-cut(cylindrical)
Application
Surface cleaning and rust removing for cast iron, cast steel, steel plates and steel pipes, metal die casting; precision casting; hardware machinery manufacturing; auto instrumentation, derusting, intensifying, smoothing and so on. Especially used in shot blasting machine and peening machine.
Application
Surface cleaning and rust removing for cast iron, cast steel, steel plates and steel pipes, especially used in shot blasting machine and peening machine.
Product detail pictures:
Related Product Guide:
We take pleasure in an exceptionally excellent status between our buyers for our superb merchandise good quality, aggressive price tag and the greatest support for Chinese wholesale Glass Beads 120# - Aluminum cut wire – TAA , The product will supply to all over the world, such as: Liberia, Holland, Suriname, We have been committed to meet all your needs and solve any technical problems you may encounter with your industrial components. Our exceptional products and vast knowledge of technology makes us the preferred choice for our customers.
By ROGER Rivkin from Puerto Rico - 2018.09.29 17:23
We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
By Ryan from Atlanta - 2017.03.28 16:34
Related products
-
Manufactur standard 1.0mm Carbon Steel Cut Wire...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specification Chemica...
-
Trending Products Spongejet Media Abrasive - B...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
-
OEM Supply Diamond Blade For Grinding - Cuttin...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
China Cheap price Where To Buy Stainless Steel ...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type It...
-
Good Quality Cut Wire Zinc Shot - Low Carbon S...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
-
Original Factory Bearing Steel Grit Gp50 - Gla...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specificatio...
