Competitive Price for Glass Bead Sizes For Blasting - Carbon steel cut wire shot – TAA
Competitive Price for Glass Bead Sizes For Blasting - Carbon steel cut wire shot – TAA Detail:
We made great improvement in material and the techniques on the basis of the traditional production process.
Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable.
Improving the wiredrawing craft which make the internal organization more dense.
Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life.
|
Item |
Technical index |
|
|
Chemical Composition% |
C |
0.45-0.85% |
|
Si |
0.15-0.55% |
|
|
Mn |
0.30-1.30% |
|
|
S |
≤0.05% |
|
|
P |
≤0.04% |
|
|
Alloy elements |
appropriate amount |
|
|
Hardness |
HRC38-50/50-55/55-60/58-63/60-65 |
|
|
Microstructure |
Deformation pearlite |
|
|
Density |
≥ 7.6g/cm3 |
|
|
Unit weight |
4.4kg/L |
|
Main sizes we can supply: 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 1.0mm.
Application
Product detail pictures:
Related Product Guide:
We thinks what clients think, the urgency of urgency to act from the interests of a purchaser position of principle, allowing for greater top quality, decrease processing costs, price ranges are much more reasonable, won the new and aged prospects the support and affirmation for Competitive Price for Glass Bead Sizes For Blasting - Carbon steel cut wire shot – TAA , The product will supply to all over the world, such as: Germany, Sacramento, Malaysia, Our solutions have national accreditation standards for experienced, premium quality goods, affordable value, was welcomed by people around the globe. Our products will continue to increase in the order and look forward to cooperation with you, Truly must any of people goods be of interest to you, make sure you letus know. We're likely to be delighted to give you a quotation up on receipt of one's in depth specs.
By Judy from Peru - 2017.11.01 17:04
This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
By Andy from Montpellier - 2018.11.22 12:28
Related products
-
High Quality Gl14 Bearing Steel Grit - Steel G...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
Chinese wholesale Bearing Steel Grit Gh16 - St...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...
-
Wholesale Dealers of Brown Fused Alumina Manufa...
We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life. Item Technical index Chemi...
-
OEM Manufacturer China Brown Fused Alumina - B...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...
-
18 Years Factory Rubber Belt Tumble Shot Blast ...
Available Spare parts materials Content of Cr-12%, 20%, 25% or as request. Product Features Advanced & scientific precision casting Process and technology . High efficiency and automatic single station drying production line. Special high chromium abrasion casting iron spare parts, making up gaps in the domestic industry. Original Equipment Manufactured (OEM) parts are available. We also offer quality aftermarket parts for other brand machines.
-
8 Year Exporter Internal Blasting Machine - Co...
Advantages of Track-passing shot blasting machine * Reliable blasting technology: Our high performance turbine units are very reliable. They are highly effficient due to the low number of wearing parts, maintenance-friendly design and high abrasive flow rate. * Low maintenance: Regular maintenance helps maintain the value of the machines. Large maintenance doors provide easy access to all essential components and facilitate the rapid replacement of wearing parts. * Innovative filter tec...
