Discount Price G80 Bearing Steel Grit - Bearing steel grit – TAA
Discount Price G80 Bearing Steel Grit - Bearing steel grit – TAA Detail:
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features:
Raw Material
Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium.
Technology
Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects.
Low wear
The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with ball surfaces.
Technical specification
|
Chemical Composition% |
C |
0.80-1.20 |
|
|
Si |
0.15-1.20 |
||
|
Mn |
0.30-1.20 |
||
|
Cr |
0.60-1.65 |
||
|
S |
<0.050 |
||
|
P |
<0.050 |
||
|
Hardness |
GP:46-50HRC |
GH:>60HRC |
|
|
GL:56-60HRC |
|||
|
GH:>60HRC |
|||
|
Application |
Sand blasting |
Stone cutting |
|
|
Microstructure |
Homogeneous tempered martensite |
||
|
Density |
≥7.5g/cm3 |
||
|
Appearance |
Angular |
||
Application
Sanding blasting for body section, container box body, wild electricity equipment, locomotives, steel structure, port machinery etc.
Stone cutting/granite cutting in gang saw machine
Product detail pictures:
Related Product Guide:
Dedicated to strict high-quality management and considerate purchaser support, our experienced employees members are usually available to discuss your specifications and be certain full shopper satisfaction for Discount Price G80 Bearing Steel Grit - Bearing steel grit – TAA , The product will supply to all over the world, such as: Vietnam, UAE, Plymouth, Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to supply our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We have been ready to face the worries and make the improve to understand all the possibilities in international trade.
By May from Hamburg - 2017.09.09 10:18
Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
By Eve from Italy - 2018.11.22 12:28
Related products
-
High Performance Abrasive Shot - Brown Fused A...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...
-
Wholesale blasting glass bead - Copper cut wir...
Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...
-
Lowest Price for Ball Blasting Machine - Conti...
Advantages of Track-passing shot blasting machine * Reliable blasting technology: Our high performance turbine units are very reliable. They are highly effficient due to the low number of wearing parts, maintenance-friendly design and high abrasive flow rate. * Low maintenance: Regular maintenance helps maintain the value of the machines. Large maintenance doors provide easy access to all essential components and facilitate the rapid replacement of wearing parts. * Innovative filter tec...
-
Factory wholesale Aluminum Cut Wire 0.6mm - Gl...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specification Chemica...
-
factory customized Stainless Steel Shot Blastin...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...
-
Newly Arrival Aluminum Cut Wire 2.5mm - Carbon...
We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life. Item Technical index ...
