Factory Cheap Hot Glass Beads 180# - Stainless steel grit – TAA
Factory Cheap Hot Glass Beads 180# - Stainless steel grit – TAA Detail:
Features
* Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc.
* Low dust emissions,improving operating environment, environmental friendly.
* Can replace part of the pickling process.
* Low dust emission and excellent operating environment, reducing the treatment of pickling waste.
* Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum.
* Can Be Used for Different Machines: blast rooms and blast cabinets as well as in centrifugal wheel blast machines.
* Blasting systems:Both Pressure blast system, Airless blast-cleaning equipment workable.
Technical specification
Hardness: >HRC57
Density: ＞ 7.0g/cm3
|
Screen |
In |
mm |
SG18 |
SG25 |
SG40 |
SG50 |
SG80 |
|
14# |
0.0555 |
1.40 |
All pass |
||||
|
16# |
0.0469 |
1.18 |
All pass |
||||
|
18# |
0.0394 |
1.00 |
≥75% |
All pass |
|||
|
20# |
0.0331 |
0.85 |
|||||
|
25# |
0.0280 |
0.71 |
≥85% |
≥70% |
All pass |
||
|
30# |
0.0232 |
0.60 |
|||||
|
35# |
0.0197 |
0.500 |
|||||
|
40# |
0.0165 |
0.425 |
≥80% |
≥70% |
All pass |
||
|
45# |
0.0138 |
0.355 |
|||||
|
50# |
0.0117 |
0.300 |
≥80% |
≥65% |
|||
|
80# |
0.0070 |
0.180 |
≥75% |
≥60% |
|||
|
120# |
0.0049 |
0.125 |
≥70% |
Application
* Surface finishing of non-ferrous components
* Surface preparation prior to paint or coating
* Removal of ceramic from investment castings
* Descaling of non-ferrous heat treat parts
* Cleaning of welded joints
* Etching of plastic components prior to bonding
* Anchor profiling for paint and powder coat adhesion
Product detail pictures:
Related Product Guide:
Our concentrate on should be to consolidate and enhance the quality and service of present products, meanwhile consistently produce new products to meet unique customers' demands for Factory Cheap Hot Glass Beads 180# - Stainless steel grit – TAA , The product will supply to all over the world, such as: Finland, Haiti, Costa rica, With excellent solutions, high quality service and sincere attitude of service, we ensure customer satisfaction and help customers create value for mutual benefit and create a win-win situation. Welcome customers all over the world to contact us or visit our company. We'll satisfy you with our qualified service!
By Cindy from Islamabad - 2018.12.22 12:52
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Genevieve from Adelaide - 2017.09.26 12:12
Related products
-
factory low price Steel Grit G16 - Garnet R...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...
-
Top Quality Cutting Disc For Aluminum - Grindi...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Renewable Design for Continuous Overhead Rail S...
Important Advantages AGTOS blasting technology: Our turbines are strong power units which are highly cost-effective due to fewer wear parts and a high abrasive flfl ow. Easy to maintain The innovative filtering technology convinces through strong performances. Automation Blasting of flfl ame cut pieces in a basket Blasting machine with adjustable passage height Bar blasting machine Blast machine for metal sheets, sections and constructions with a passage height of up to 1000 m Diabolo b...
-
Good quality Gh120 Bearing Steel Grit - Stainl...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
Ordinary Discount Sponge Jet Manual - Bearing ...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
-
Cheap price G40 Stainless Steel Grit - Sponge ...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
