Factory Cheap Protective Duvet Liner - Belt tumble shot blast machine – TAA
Factory Cheap Protective Duvet Liner - Belt tumble shot blast machine – TAA Detail:
Advantages of TAA rubber belt tumble blast machines
Reliable blasting technology
Innovative filter technology
Many different variants
Automation through harmonisation with in-house transport system.
TAA high-performance turbines: Our turbines are solid, well-constructed pieces of machinery. Due to a smaller number of wear parts and high abrasive throughput, they operate extremely economically.
Many different variants: Because of the many different variants, it is possible to build the optimal blast machine for the intended application.
Automation: Machines can be optimally integrated with in house logistics systems. Custom solutions using special containers have already been successfully implemented.
Dual-purpose machine for mass production and individual parts.
The MGDT blast machine is character ized by a high degree of flexibility.
It is used to clean turned and milled parts after hardening. The machine’s belt has a load capacity of 400 kg for mass production parts with an individual weight of up to 15 kg. The turntable is used to clean impact-sensitive parts (e.g., armature shafts for electrical appliances). The table has a diameter of 680 mm and a load capacity of 150 kg.
Rubber belt tumble blast machines are available in the following standard sizes
| Specifications | MG 50 | MG 90 | MG 180 | MG 270 | MG 350 | MG 550 |
| Fill capacity (1) | 50 | 90 | 180 | 270 | 350 | 550 |
| Belt dimensions tp x width in mm 0x®g (ft*) | 500×700 | 600×800 | 800×900 | 800×1.350 | 1,000×1.350 | 1.200×1.200 |
| Max.single work piece weight (kg) | 10 | 10 | 15 | 25 | 25 | 25 |
| Max.weight of load(kg) | WO | 200 | 400 | 600 | 800 | xooo |
| Work piece transport | Optional | Optional | Optional | Optional | Optional | Optional |
| Abrasive conveyor system | Screw | Vibrating conveyor or screw | Vibrating conveyor or screw | Vibrating conveyor or screw |
Vibrating conveyor or screw |
Vibrating conveyor or screw |
| Turbine (number x kw) | 1×5,5 1×7,S | 1×7,S | M7,S 1×11 | 2×7,5 2×11 |
2×11 2×18,5 |
2×11 2×18,5 |
| Loader | Optional | Optional | Optional | Optional | Optional | Optional |
| Filter unit | PF 4/4 | PF 4/4 | PF 4/6 | PF 4/9 | PF 4/12 | PF 4/12 |
Product detail pictures:
Related Product Guide:
We also offer product sourcing and flight consolidation services. We have our own factory and sourcing office. We can provide you with almost every type of product related to our product range for Factory Cheap Protective Duvet Liner - Belt tumble shot blast machine – TAA , The product will supply to all over the world, such as: Slovak Republic, Indonesia, Montpellier, Since always, we adhering to the "open and fair, share to get, the pursuit of excellence, and creation of value"values, adhere to the"integrity and efficient, trade-oriented, best way , best valve" business philosophy. Together with our all over the world have branches and partners to develop new business areas, maximum common values. We sincerely welcome and together we share in global resources, opening up new career together with the chapter.
By Erin from Kazakhstan - 2017.09.30 16:36
The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
By Doris from Greece - 2017.09.29 11:19
Related products
-
Super Purchasing for Sponge Media Silver 80 Mes...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
-
Best-Selling Sae Stanadrd Steel Shot - Steel G...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
OEM Manufacturer 0.3mm Carbon Steel Cut Wire -...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
-
Big discounting Diamond Saw Cutting - Cutting ...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Fixed Competitive Price Cup Stone Grinding Whee...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Manufacturer of Cast Steel Shot For Surface Cle...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
