Factory Cheap Protective Duvet Liner - Hanger type shot blast machine – TAA
Factory Cheap Protective Duvet Liner - Hanger type shot blast machine – TAA Detail:
As a rule, hanger-type blast machines are offered either for batch or continuous processing. However, there are many intermediate designs that are oriented towards different kinds of overhead conveyor systems. In many cases, different processes such as blasting, painting and subsequent drying can be interconnected via the overhead conveyor system. This makes it possible to tap an enormous potential for streamlining the process workflow.
Additional processing variants are created by using different kinds of work piece holders to assist in the process of feeding work pieces to the blasting machine. In many cases, standard holders such as disks, baskets or rods can solve the application challenges. However, the increasingly detailed needs of our customers often lead to the creation of tailor-made solutions.
| Work pieces | Gears for wind turbines | Hardened parts | Gears | Hanging construction | Several castings (letters, grave decorations, decorations) | Tool forms, special castings |
| Machine type | Hanger-type blast machine | Hanger-type blast machine | Hanger-type blast machine | Hanger-type blast machine | Hanger-type blast machine | Hanger-type blast machine |
| Machine identification | HT 17-17 | HT 11-13 | HT 25-17 | HT 17-27 | HT 11-13 | HT 17-23 |
| Turbine type | 3.6 | 3.6 | 4.8 | 3.6 | 3.6 | 3.6 |
| Number/kW of turbines | 2/15,0 | 2/11,0 | 2/22,0 | 4/7,5 | 2/7,5 | 3/7,5 |
| Details | Blast machine with longer screw conveyor and steel grating in front of the machine | Cleaning | Blast machine with longer screw conveyor and steel grating in front of the machine | Blasting of hangers after the pyrolysis | Foundry-design with magnetic separator to separate abrasive and cast sand |
Product detail pictures:
Related Product Guide:
Assume full duty to satisfy all demands of our clients; reach steady advancements by marketing the development of our purchasers; grow to be the final permanent cooperative partner of clientele and maximize the interests of customers for Factory Cheap Protective Duvet Liner - Hanger type shot blast machine – TAA , The product will supply to all over the world, such as: Monaco, Mongolia, Norwegian, There are advanced producing & processing equipment and skilled workers to ensure the merchandise with high quality. We've got found an excellent before-sale, sale, after-sale service to ensure the customers that could rest assured to make orders. Until now our merchandise are now moving on fast and very popular in South America, East Asia, the Middle east, Africa, etc.
By Jean from Mumbai - 2017.10.25 15:53
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By Joanna from Nicaragua - 2018.06.18 17:25
Related products
-
Professional China Steel Grit Gl16 - Zinc cut ...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and ...
-
Lowest Price for Glass Bead Abrasive Blasting -...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
-
OEM Manufacturer 0.3mm Carbon Steel Cut Wire -...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
Manufactur standard Angular Alloy Grit - Carbo...
We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life. Item Technical index Chemi...
-
Reasonable price for Stainless Steel Shot Machi...
We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life. Item Technical index ...
-
Good quality The Copper Shot - Low Carbon Stee...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
