Factory directly supply 30# Glass Beads - Garnet – TAA
Factory directly supply 30# Glass Beads - Garnet – TAA Detail:
Features
■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area.
■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not adversely dimples and pits, easy access to 50-70 microns surface roughness.
■ Recyclable—Its excellent tenacity and lower brittleness can lower damage rates and higher productivity. Depending on the specific application, it can be reused up to 3 times.
■ Lower Production Costs—The paint’s adhesion and corrosion resistance depends on the cleanliness and surface roughness of base material. Using garnet abrasive can greatly saving the amount of paint by completely eliminate adverse spur and pits.
■ Improve Health and Safety—It’s non-toxic characteristics can greatly reducing silicosis, leaching of metals or radioactive contamination risks.
Technical specification
|
Item |
Content |
Physical Properties |
||
|
Chemical compositions % |
SiO2 |
34-40% |
Mohs Hardness |
Mohs 7.5-8.0 |
|
Fe2O3+FeO |
25-31% |
Specific Gravity |
3.7-4.2g/cm3 |
|
|
Al2O3 |
15-21% |
Bulk Density |
1.8-1.9g/cm3 |
|
|
MgO |
5-6% |
Chloride Content |
10-15ppm(25ppm max) |
|
|
CaO |
5-10% |
Color |
Red/Pink/brown |
|
|
MnO |
0-1.0% |
Acid Solubility |
<1% |
|
|
TiO2 |
0.25% |
Grain Shape |
Sub Angular |
|
Commonly used sizes
20/40mesh, 30/60mesh, 80mesh, 70/100mesh etc.
Applications
Blasting abrasives: Derusting of steel structure, hull, bridges
Water jet cutting: Cutting metal, stone, glass
Grinding media: Grinding marble, optical lens, glass, leather and other materials
Filter medium of chemical, petroleum, pharmacy, water treatment
Coated abrasives of grinding wheel, emery cloth, sandpaper
Wear-resistant material: Used in highway pavement, airport runway, prevent slippery, wear-resisting rubber paint
Product detail pictures:
Related Product Guide:
Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for Factory directly supply 30# Glass Beads - Garnet – TAA , The product will supply to all over the world, such as: US, Ottawa, Romania, Many years of work experience, we have now realized the importance of providing good quality products and solutions and the best before-sales and after-sales services. Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it. faster delivery time and the product you want is our Criterion .
By Leona from Ottawa - 2017.02.18 15:54
It is a very good, very rare business partners, looking forward to the next more perfect cooperation!
By Marcy Real from kazan - 2018.08.12 12:27
Related products
-
Big Discount Plate End - Blast wheels – TAA
TAA high performance blast wheel have proven themselves on the market to be robust, economically efficient and maintenance-friendly. They are available with different turbine wheel diameters and a variety of spare and wear materials (e. g. hard metal). TAA high performance blast wheels are very popular for modernizing conventional shot-blasting machines as well. Product Features Improving shot blasting speed obviously Good wear resistance Reducing energy consumption greatly Extraordinary serv...
-
Factory made hot-sale Steel Grit G50 - Steel G...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelti...
-
Original Factory Protective Liner - Hanger Typ...
As a rule, hanger-type blast machines are offered either for batch or continuous processing. However, there are many intermediate designs that are oriented towards different kinds of overhead conveyor systems. In many cases, different processes such as blasting, painting and subsequent drying can be interconnected via the overhead conveyor system. This makes it possible to tap an enormous potential for streamlining the process workflow. Additional processing variants are created by using diff...
-
Factory Cheap Hot Sandblasting Garnet For Sale ...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...
-
Factory making Protective Liners - Drum shot b...
Advantages of drum shot blast machine Reliable Blasting Technology: Drum shot blast machines are manufactured in several different variants, types and sizes. They are compact and only have a very small footprint. Continuous throughput can be realised by linking several machines. Maintenance-friendly Layout: Regular maintenance is important for preserving the long-term value of the equipment. Large service and inspection doors provide easy access to all of the important components. As a result...
-
OEM Supply Soft Blasting Media - Zinc cut wire...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
